The maintenance method of the mobile crusher in the process of use and the matters that should be paid attention to.

1. Periodic inspection of the wear of the internal parts of the machine
To regularly check the wear inside the machine parts, such as the degree of wear center feeding tube and cone cap, impeller, flow channel lining board, circular plate, the plate, the severe wear should be promptly repaired or replaced, while the replacement parts weight, type and size, according to a component the parameters of the original replacement.

2. Do a good job in lubrication
We should always pay attention to and timely lubrication of friction surface, grease and it should be used according to the location and temperature conditions, the general condition, calcium sodium base grease and calcium sodium grease; add grease should be the first to use the clean gasoline or kerosene cleaning roller bearing raceway. Then add, add grease in the bearing seat shall be the space volume of about 50%, and every 3~6 months to replace one, so as to ensure the normal operation of the machine and prolongs the service life.

3. Keep the equipment clean
Keep the equipment clean, Water Leakage ash, more attention should be paid to dust and debris shall enter the lubrication system and lubricating parts, because these debris will not only destroy the lubricating oil film, but also can make the equipment lubrication loss increased wear, shorten the service life of the equipment; paying particular attention to the regular cleaning of bearings, crusher in 2000 hours after the open bearing cleaning spindle assembly, generally after 7200 hours of work to replace new bearing.

Our country proposed further needs for industrial improvement based inside the principle of green environmental protection and independent innovation. Stone crusher manufacturing industry insists around the green avenue of green manufacturing and independent innovation combination to realize the transfer for our mining machinery manufacturing business from major scale to robust power. Stone crusher gear with green manufacturing mode will promote the science and technologies innovation towards a brand new area and to an unprecedented level.

The worsening of ecological atmosphere which makes low carbon economy become the improvement trend of mining machinery specifically the crushers. In order to low carbon draws close, we make a new mechanical improvement in 3 aspects: improving the degree of technologies, cultivating high-quality talent and raising the entire level of this industry.

Stone Crushing market needs inner communication and cooperation. Using the fierce competitors, enterprises have their very own privacy information and policies. Certainly this scenario is all-natural inside the method of self-development. Nevertheless it will restrict the promation within the industrial technological level. For that reason, for the integral improvement crusher enterprises have to have far more communications and a few with high technology enable other with low technology.