Portable Crushers can be pulled to the material work site without installation, and directly start production operations, and the cooperation between the components is reasonable, incarnated as a small production line, high production efficiency. There are many different configuration combination models for the equipment, and Portable Crusher Plant with different crushing equipments can be selected according to the needs. Common types are jaw crusher, cone crusher, impact crusher, hammer crusher and so on. Further refinement, it is relatively complex, because each crushing equipment can be randomly combined into different forms of portable stone crusher.

Imported motor system is adopted in the portable crusher plant. The driving force is full. The tyre movable mode can reach all kinds of production sites. After entering the site, the production can be carried out directly only by extending the equipment, without the construction and installation of infrastructure, the cost and duration of energy-saving production, the operation is efficient, and the transfer is also comparable. Then, with the change of material accumulation and in-depth production. The chassis of the movable tyre gravel crusher is stable and passable. Whether it is mountainous, flat, wetland or climbing, it can pass through flexibly. The line of the steel frame body is smooth, the combination of various production equipments and the independent production line is strong. It can be adjusted according to different site requirements. In the production process, its pulse dust removal device and automatic spraying device can effectively reduce the dust in the production process, reduce environmental pollution, realize green environmental protection production, and have a good road of sustainable development.

Under these different configurations, the size of materials handled by the portable crusher plant during operation is different. You should first understand the granularity requirements of the materials in your gravel factory. In addition, you also need to provide a requirement for the output of equipment or daily output. According to your actual needs, you can recommend suitable types and models of portable gravel crusher to ensure the smooth road of your later production.

For more information about stone crushers, we're 24h online service: https://www.zenithcrusher.com/

Has overcome the defect of easy-vibration and easy-abrasion, the vertical grinding mill has gradually become the principal force of processing micro slag powders. The specific surface area of the micro slag processed by this machine is 420~450m2/kg which greatly satisfies the demands of the customers. The vertical mill researched is integrated with drying, powder grinding, powder concentrating and elevating, adopts reasonable and reliable structural design and combines with advanced technological process which completely conquers the thousands of customers of the micro slag grinding market.

Here the engineers of researching LM vertical mill will explain to you the processing course of the micro slag grinding in detail.

1. The determination of dimensions and basic parameters including the water content of wet slag, materials feeding granularity and the output of the grinding mill.

2. The main engine equipment, the output and power of the vertical roller mill, and the processed air quantity of the dust collector.

3. The storage of the materials.

(1) Wet slag: Generally speaking, the wet slag is directly sent from the slag storage yard by the belt conveyor into the wet slag cabin in the plant, and the wet slag cabin cannot be too large, and as long as it is able to hold the materials for four to eight hours in order to prevent the wet slag from caking unused for a long period of time. In addition, it is not proper to convey the wet slag with elevator because it may stick or bond in the hopper which will reduce the conveying capacity.

(2) Micro powdering of the slag: If the source of the slag is single and the quality is stable, the company may build a homogenization bank; and if there are many sources, then the company need to build two homogenization banks in order to make sure that the products delivered from the plant are stable in quality.

4. Package:

Since the micro slag is directly used in the concrete mixing station, more often than not, they are transported by the train, car or ship in bulk. If it is necessary to use bag package, the big bag package is often used and small bag packaging is not suitable from the point of reducing the cost.

5. Deironing in the system.

The vertical mill adopts outside cycling, so it is very convenient to remove the iron materials. And what is more, electric magnetic iron remover should be installed inside the mill, on the feeding belt conveyor and the coarse powder feeding part in order to reduce the iron content of the materials that are fed into the mill and reduce the abrasion.

For more information on grinding mill price, please consult: https://www.sbmchina.com/equipments/

Portable stone crusher plant is a series of rock and construction waste crushing equipment developed by our company. Its appearance greatly expands the concept of crushing operation. Portable crusher plant can be equipped with equipment such as E-break, counter-break and cone break according to production demand. Its design concept eliminates the obstacles brought by fragmented sites, environment, complex infrastructure and complex logistics to customers'fragmentation operations, and truly provides customers with efficient and low-cost hardware facilities for project operation. In the production line, the feed size required by the portable crusher plant is between 1-750 mm, and its production capacity can reach 90-450 t/h. It is mainly used in mining ore crushing, construction waste recycling, construction aggregate production, highway, railway, road and bridge construction and other industries.

2. Product Performance Characteristics

(1) Diversification of mobile and flexible combination

The portable crusher plant has compact structure and strong stability, so that the crushing station can meet the demand of maneuverability both on the work site and on the highway. Various types of machines can be quickly combined with other models to meet the different needs of production operations.

(2) Operation directly and effectively reduces material transportation costs

Each type of combined operation can crush materials on site. After crushing and screening, the finished products of materials can directly meet the customer's requirements. It also eliminates the intermediate link of re-crushing materials from the work site, which greatly reduces the transportation cost of materials.

(3) Customization on demand with strong adaptability

The portable stone crusher can be equipped with independent generators, even if the local power grid can not be used, the machine can still operate normally. At the same time, our company can customize the portable crusher plant according to the customer's site, material, particle size and other requirements.

(4) Reliable performance and convenient maintenance

The portable crusher plant adopts excellent crusher, vibrating screen and feeder with stable and reliable quality. Based on years of manufacturing experience of portable crusher plant, the crushing station has mature technology, simple operation and convenient maintenance.

Stone Crusher includes jaw crusher, impact crusher, cone crusher, mobile crusher, fine crusher, roll crusher, hammer crusher and so on.

Characteristics of stone crushing line:

They are widely used in the mine, metallurgy, building components, highway, railway, water irrigation and chemical industry. They have the features: massive crushing ratio, even granularity, simple structure, reliable functioning condition, convenient repair and economical operation.

Operating principle of stone production line :

Large dimension stones are transferred to main crusher as a result of Vibrating Feeder from hopper for very first crushing, then the crushed products are transferred to Impact Crusher via Belt Conveyor for secondary crushing. The crushed resources might be transferred towards the vibrating screen, and separated to diverse sizes. Those aggregate with ideal dimension will be transferred towards the last item pile and these with unsuitable size are going to be transferred on the Affect Crusher for re-crushing. This kinds a closed circuit manifold cycles. The sizes of final merchandise are going to be graded and separated in accordance to customers' prerequisites, plus the deduster will likely be connected for that sake of natural environment protection.

Portable Crusher Plant: http://www.zenithcrusher.com/ver2.0/Products/Crushing/Mobile-Crusher/Portable-Jaw-Crusher-Plant.html