Raymond mill is integrated with crushing, drying, grinding and grading transportation. The system is simple and compact, with an area of about 50% of the ball mill system, and can be laid out in the open air, thus reducing a lot of investment cost. The Raymond Mill grinding efficiency is large quantity, can be widely used in mineral processing, building materials, minerals and other fields, for lime grinding effect is very significant, by Raymond mill grinding lime can play a better market value, so it is popular among consumers.

Raymond mill is our company based on years of experience in R & D and production of milling machine, granulated blast furnace slag special products, through multi unit cooperation professional team of painstaking research, the calculation, the thermodynamic system of mill equipment selection calculation, the main parameters are calculated, such as the research and development of superfine powder selecting machine grinding equipment design, it in grinding, drying and grading in one, has the characteristics of high grinding efficiency, drying ability etc.. The simplified process, less area, investment, power consumption is greatly reduced, the service life is long, the operation rate of ultrafine powder buffing new technology high.

After many years of accumulated technology, combined with the customer experience, continuous improvement, Raymond Mill manufacturing quality reliable, energy saving and environmental protection, benefits are obvious, has been recognized by customers, as a new technology in the field of Raymond Mill mark.

Stone crushing equipment is dedicated to ore crushing processing, we all know that natural ore cannot be directly used in ore crushing processing, limestone, calcite and granite ore must first after stone crushing equipment and other mining machinery equipment of crushing processing can be used in our daily production and life.

Jaw crusher is broken ore commonly used a mechanical stone crusher, jaw crusher in crushing ore motor drive belt and pulley, make through eccentric shaft dynamic jaw movement up and down, when moving jaw rises between the bracket and fixed jaw Angle, so as to promote dynamic jaw plate to the fixed jaw close, rather than the material being crushed or broken at the same time, achieve the goal of broken.

Cone crusher is also commonly used stone crushing equipment, cone crusher adopts the advanced production craft and technology, a lot of time feeding broken, has characteristics of high efficiency, energy conservation, environmental protection, its characteristic can adjust according to the demand, coarse, medium and fine, can meet various specifications.

In the application of the limestone, which has important applications in building materials, glass industry, these different application process is different for the material demand, mainly is the fineness of the gap, and for the material processing, our choice is generally a ultrafine mill, now more mill types on the market and why should we choose this machine as its deep processing production equipment?

1. The reasons for the processing of limestone by ultrafine mill

The limestone Mohs hardness of properties of brittle, and ultrafine mill can process the material hardness on the Mohs below level seven, humidity below 6%, and belong to non inflammable mineral material, therefore the machine for limestone processing is feasible, the product quality is good, has a good application in the chemical industry, building materials and other industries, also said the production line investment recovery efficiency better, these two aspects are the main reason for the production configuration;

2. Advantages of ultrafine mill to process limestone

The production level, the material crushing, grinding, lifting, dusting, packaging integration, the automation of the production process, reduce the complexity of the operation, but also a great help to reduce labor, another device arranged on the tail of dust removing device, can effectively reduce dust emissions, make the production process to comply with the dust emission standards, reduce environmental pollution, dust collection device and the precipitation down, but also can be used in product sales, it also increases the ore grinding rate, to avoid the waste of resources, bring good profit for enterprises.

We based on the in-depth study of traditional grinding mill, developed SCM ultrafine mill. This SCM Ultrafine Mill is building materials, mines, electric power and other industries of hard materials, micro fine grinding equipment, such as raw materials for limestone grinding cement manufacturing industry, sintering clinker with blending material powder into the finished cement, ore mine ore fine grinding in order to improve the grade of ore, coal power plants will be ground for full combustion.

The ultrafine mill, using the multipoint feeding, the innovative design of mill feed grinding and feeding, grinding, sieving into the discharge tube and the external aggregate, spiral feed back pipe and feed back device structure, the abrasion resistant material to grinding, grinding time, easy to wear the material for grinding, shorten the grinding time, the grinding process for grinding mill grinding sieving, its circulation, improve the mill performance and technical level, to simplify the process, reduce the equipment configuration, reduce the investment and energy saving purposes.

The technology principle of multi-point reclaiming for ultrafine grinder is that the shaft of the fine powder tube mill is set to 2 -4 grinding stores, and the material moves under the impact of the abrasive body in the cylinder body and the front end of the self tube body to the rear end. When the material is grinded by a warehouse, the fineness of a part of the material is reached to the finished product. In order to make this part of the material can be extracted, the invention is in between the tail warehouse superfine grinding machine machine each warehouse with a double chamber chamber separating device part is provided with a material extraction isolation device, diaphragm lifting plate, the circumferential direction of the tube body compartment parts set a uniform distribution of the material a radial hole, the outer side of the cylinder body hole welding material body with double flange shape, a lateral body material provided with a discharge hood, an air outlet is arranged at the top of the cover material, outlet and the external equipment dust suction pipe connection, after finished material bin before grinding after being extracted here. The finished product is collected through the external set of dust collector and sent to the finished product hoist, together with the finished finished product into the finished storage tank.

The percussive sand making machine is  used in most of the domestic projects, and its sand making machine effect is affected by many factors. Recently, it has been consulted by the users that the sand production of the machine is low and the economic benefit is not good. The effect of water content and feed amount of the broken material on the sand production of the percussive sand making machine is mainly analyzed.

1. When the water content of the broken material is controlled in a certain range, it can play an important role in the effect of dust removal, but it will lower the amount of sand production when the water content is high.

2. The effect of the water content of material on the quantity of sand production is as follows:
When the water content of the material is not more than 2%, the dust pollution is serious during the process of crushing, and the dust removal device must be adopted.

3. When the water content of the material is more than 5%, the rate of sand production is obviously reduced, and the output of the material decreases sharply with the increase of the water content of the material.

4. When the water content is up to 9%-11%, the rate of sand production is almost zero.

5. When water content is more than 11%, wet sand production should be used, but the amount of sand production is lower than that of dry process.

The effect of feed quantity on sand production of sand machine:
1. when the feed amount is small, the amount of sand production increases with the increase of feed quantity.
2. when the amount of feed is increased to a certain amount, the amount of sand production reaches the value.
3. when the amount of feed is more than a certain amount, the amount of sand production will be reduced. The reason is the large flow broken stone, the stone thrown most above the rotor flow in the stone is not playing on the anvil's sake.

In particle size, water content and crusher rotor at the same speed, feeding amount, then reduce the content of finished powder sand and modulus of sand particle size increases; when the moisture content of the material, stable material feeding, crushing machine rotor at the same speed, if the particle size increases, the content of stone powder the increase in particle size and modulus decreased; particle size, moisture content, feeding the same amount, rotor speed rise, increase the content of powder sand, particle size reduced modulus.

Sand Making Machine: http://www.hotquarrycrusher.com/products/crushing/vsi-sand-making-machine.html

In the series of pulverizer products developed by the company, there is a series of common series, that is ultrafine mill. This Ultrafine Mill has an important role in the production of cement. With the rapid development of the domestic real estate, real estate and related downstream industries have been developing very fast, the industry, ore processing in cement production machinery manufacturing industry have made great development, and the development process in cement production industry, cannot do without the help of ultrafine mill.

Cement is necessary for building construction products, and is mainly sand, water mixing into concrete, cement in concrete production plays the main role is the binder, and the steel and concrete production is the main material for building construction, from this point we can see that an important role in the construction of cement built in.

Cement is a widely used product. In order to meet the demand for cement in the market, many customers are engaged in cement processing and production, so how is cement produced? Generally speaking, cement is the process of processing ore powder after firing. Mineral powder is an important material for cement production, so to produce cement, we first need to produce mineral powder.

There are many kinds of different kinds of ore powder, because it was obtained after grinding, ore is different, and in the production of cement powder needed is mostly obtained by limestone after grinding, grinding into powder or limestone, is a raw material for cement production.

Because in the cement production of limestone powder fineness requirements are not very high, so we used to ultrafine mill powder grinding is different from other milling equipment, we usually use ultrafine mill to grind limestone in cement production, because the vertical milling machine company development and production to grind limestone, limestone and the ground below 650 mesh the fineness, and customers through the finished material fineness regulation can accurately adjust the fineness of slag, limestone for specific processing, so as to meet the requirements of cement production, in order to serve the construction industry, so as to bring economic benefits to customers.

Ultrafine mill is the most commonly used equipment in cement production. It can not only be used as grinding material for limestone and other raw materials, but also can be used for the production of desulfurizer, so as to help the flue gas desulfurization of cement plant after burning, so as to achieve environmental protection production.

Raymond mill has high sales in the market, the quality of the Raymond mill can bring customer high yields and yield, efficiency, also can make Raymond mill factory of the brand, the so-called word-of-mouth effect. The application of Raymond powder mill is widely used, which is the grinding equipment chosen by many powder enterprises.

Raymond mill pressure is produced by hydraulic system, hydraulic system of hydraulic station and hydraulic cylinder, hydraulic cylinder attached to the accumulator, the grinding process on the hydraulic pressure vibration and buffer the role of mechanical load. When the pump station works, the hydraulic pressure can also be raised, and the grinding pressure should be basically equal to the grinding pressure, otherwise it will affect the normal operation of the grinding mill. The grinding roller is affected by the pressure of the roller and the drawing rod, which directly affects the output: the grinding pressure is large, the grinding effect is enhanced, and the output is high. Conversely, production is low. However, the grinding pressure should not be too large, otherwise, the main motor will be increased in accordance with the increase of the non-working, and the vibration of the pulverizer will be increased, and the lining board and other equipment of the grinding machine will be damaged. In the operation engineering, to maintain the grinding pressure in the setting range.

Raymond grinding out pattern in the material is due to Raymond mill powder weight and related parts in the hydraulic system formed by the interaction of tensioning force of milling force and the grinding pressure makes the material inside the Raymond mill to high speed, continuous mill, Raymond mill which can make the material being ruled out. However, the parts of the Raymond mill machine are very easy to wear, and if they are worn, it will cause less pressure and lower quality. At the same time, it will increase the cost, production and work efficiency will also decrease continuously. If without considering the related parts of wear condition, the hydraulic system tension force as a variable, in order to maintain the normal operation of the construction work, to increase the tensioning force liquid system, will raise Raymond mill milling force, improve the efficiency of Raymond mill work, increase the production of Raymond mill machine.

Raymond grinding machine as "star product" of mine industry, in the market, pay more attention to the development of quality, Raymond mill is a very large equipment, first of all, because of its bad working environment, grinding powder materials are large materials, and so must be a little big size, followed by Raymond grinding machine is a complete set of equipment, not only host grinder, and other auxiliary equipment, Raymond of a complete set of equipment includes: hammer crusher, bucket elevator, surge bin, vibration feeder, micro powder mill host, frequency powder classifier, double cyclone set device, pulse dust removal system, high pressure blower, air compressor, electric control system.

Such a large size of the Raymond mill, is made up of a lot of parts, although the parts are small, can have a big effect. The service life of Raymond mill is a certain period of life, like a person has a certain life span, how can the service life of Raymond mill powder mill extend? Each component should be maintained and maintained.

It is well known that the material of ore has a slightly higher hardness, and the collision friction between the Raymond mill and the ore can not be avoided. How to solve this problem rationally, or how to reduce the loss, become a lot of manufacturers thinking direction. The vulnerable parts are the most difficult parts of the Raymond mill and the most vulnerable parts. Therefore, it is necessary to protect them so that the performance of the Raymond mill powder mill can be brought into play.

In the process of Raymond grinding machine operation, there should be a fixed personnel responsible for the supervision, Raymond grinding machine operator must have professional technical training, to understand the principle of Raymond mill machine performance, familiar with operational procedures, at the same time to have the necessary maintenance tools and the accessories of the grease. Secondly, simple screening and screening of materials is necessary to avoid unnecessary wear, and routine safety inspection is necessary.

After use for a period of time, it is necessary to check the use of vulnerable parts regularly. The whole Raymond mill is a whole, if part of the problem, should stop maintenance in time, must not cause unnecessary loss because of temporary negligence. General professional Raymond grinding machine equipment and accessories are necessary, so when choosing Raymond grinding machine professional manufacturer must choose and buy, and to understand the standard degree of Raymond grinding machine all fittings.

Raymond Mill: http://www.ghanagoldcrusher.com/products/raymond-mill.html