Because of the market demand, there are more and more manufacturers of sand making machine, but not every manufacturer can produce qualified equipment. The quality of sand making machine provided by these different manufacturers has a certain gap, which makes its own development also greatly affected, so stone What conditions should the producers of sand making machines have to produce the equipment?

Before the stone sand maker machine came out, coal was solved by incineration. It has a great pollution to the environment. Since the equipment has been reduced, it has reduced environmental pollution, so its demand is large and the production and production are more and more. But some of these manufacturers are regular large manufacturers, and some are small manufacturers. The difference is not only on the scale of the factory, but also in the production strength of the factory. The technical gap makes the sand making machine have a big gap in the performance of the production and so on, and the benefit of the production project is different.

Therefore, the manufacturer must have a certain production strength to produce qualified equipment and be technically innovative rather than imitating, otherwise it will cause inferior products to users, which not only affects the problem of worsening environmental pollution, but the equipment produced by such manufacturers is at the price. It has a relatively low advantage to make its sale better, which has a great obstacle to the development of the sand making machine in China. So it is necessary to strictly demand the strength of the production entrepreneurs and the technical level to produce the stone equipment.

One point is that the manufacturer of sand making machine should have a certain service consciousness. In this way, the problems that can not be solved in the future production process can help the customers to solve the better production of the equipment, but also give the customer a good impression and help the sale of the equipment.

The above article is mainly about the sand making machine manufacturers should have what conditions, from the above introduction can be seen that only technical, service are better manufacturers can be farther, can make better development of stone sand and stone equipment.

Ultrafine mill is based on years of accumulated mill production experience, absorb the advanced mechanical manufacturing technology, a new type of powder processing equipment and testing and improvement after years of development. The ultra fine mill is widely used in paints, paper making, pigments, rubber, plastics, fillers, cosmetics, chemicals and other industries.

Ultrafine milln line roughly composed of Hubei broken machine, bucket elevator, storage hopper, vibration feeder, ultrafine grinding, host frequency classifier, cyclone powder collector or pulse dust removal system, high pressure blower, air compressor, electric control system etc.. The material is broken into smaller pieces by cone breaking.

The material by breaking machine was first broken into smaller pieces of material, hoist material into the hopper, hopper after vibration feeder material quantitative, uniform into Ultrafine milla-fine grinding mill crushing cavity material is the fineness of grinding, after crushing the material with the fan airflow into in powder selecting machine classification.

The size of the particles and the rotation speed are different, so they can be separated. The material that meets the requirements of size is passed through the separator, and then separated and collected in the powder collector, which is finished by the lower part of the powder collector. The meeting which does not meet the requirements will be re - milled into the Ultrafine milll it can pass through the separator.

The whole production line of ultra fine grinding is carried out under the condition of closed, circulating and negative pressure.

With the intermittent propulsion of national infrastructure construction, the application of sand making machine in sand industry is wider and wider. To efficiently and safely produce high-quality sand, it is very important to correctly operate this sand making plant. We will explain what should be paid attention when operating sand maker.

1. Before starting, check whether the observation door of the vortex motion chamber is tightly closed to prevent materials from rushing out and cause danger.

2. Check the rotating direction of the impeller. Seen from the direction of the feeding mouth, the impeller should rotating in the anti-clockwise direction, if not, adjust the connecting rod of the electromotor.

3. The correct starting order of sand making plant and conveyor equipment should be: ore discharging equipment-sand maker-feeder machine. The sand making equipment should be started with empty load and be fed with materials after normal operation. The stopping order is just the opposite of starting order.

4. The feeding granularity should conform to the standard, and materials bigger than the standard are forbidden to go into sand maker, otherwise it will cause unbalance and overdue abrasion of the impeller and even block the impeller pipe and central feeding pipe, and sand making equipment will not work normally. If large materials go inside, immediately discharge them.

5. When discharging equipment stops, timely stop material feeding, otherwise the impeller will be crushed and the motor will be burnt down.

6. Material feeding must be even.

7. In the running process of a sand making plant, if there is fierce vibration or abnormal noise, immediately stop the machine for examination, otherwise the impeller will be damaged.

8. Timely add lubricating grease to the machine and use dry oil lubrication. The adding amount should be 1/2-2/3 of the cavity of the bearing.

We hopes that the above advice can help customers to correctly operate a sand maker and reduce the failure in the using process to contribute to the fast development of infrastructure construction.