The maintenance method of the mobile crusher in the process of use and the matters that should be paid attention to.

1. Periodic inspection of the wear of the internal parts of the machine
To regularly check the wear inside the machine parts, such as the degree of wear center feeding tube and cone cap, impeller, flow channel lining board, circular plate, the plate, the severe wear should be promptly repaired or replaced, while the replacement parts weight, type and size, according to a component the parameters of the original replacement.

2. Do a good job in lubrication
We should always pay attention to and timely lubrication of friction surface, grease and it should be used according to the location and temperature conditions, the general condition, calcium sodium base grease and calcium sodium grease; add grease should be the first to use the clean gasoline or kerosene cleaning roller bearing raceway. Then add, add grease in the bearing seat shall be the space volume of about 50%, and every 3~6 months to replace one, so as to ensure the normal operation of the machine and prolongs the service life.

3. Keep the equipment clean
Keep the equipment clean, Water Leakage ash, more attention should be paid to dust and debris shall enter the lubrication system and lubricating parts, because these debris will not only destroy the lubricating oil film, but also can make the equipment lubrication loss increased wear, shorten the service life of the equipment; paying particular attention to the regular cleaning of bearings, crusher in 2000 hours after the open bearing cleaning spindle assembly, generally after 7200 hours of work to replace new bearing.