Granite crushing production line is one of the common production lines in gravel production. The granite crushing plant is featured by high automation, high crushing rate, energy saving, large output, uniform particle size and good particle shape, which is suitable for construction of various large and medium-sized projects such as highway and bridge. The design output of granite crushing production line is generally 50-800t / h. In order to meet different processing needs of customers, cone crusher and dust removal equipment can be equipped.

The raw material is preliminarily crushed by the jaw crusher; secondly, the coarse material produced is transported to the fine crusher by the belt conveyor for further crushing; then, the fine crushed stone enters the vibrating screen to separate three different sizes of stones and stones, and the oversized stones return to the impact crusher for further crushing.

Advantages of Granite Process Line

The production cost of the whole production line is low. Generally, the traditional granite crushing production line needs a large amount of water for sand washing in the production. To a certain extent, the user increases the investment in water resources, while the production line does not need the investment in water, which reduces the investment in capital to a certain extent. In addition, the production line has stable operation, high production efficiency, short recovery cycle and small investment risk, which is worth the investment of users and friends.

1. The layout design of the production line is reasonable, the floor area is small and the running stability is good;

2. The overall investment is small, the income is high and the operation cost is relatively low;

3. Simple operation and high safety;

4. Simple maintenance, low cost and strong expansibility in the later stage.

Granite Crushing Processing: https://m.zenithcrusher.com/materials/granite.html

Granite crushing production line is one of the common production lines in gravel production. The granite crushing plant is featured by high automation, high crushing rate, energy saving, large output, uniform particle size and good particle shape, which is suitable for construction of various large and medium-sized projects such as highway and bridge. The design output of granite crushing production line is generally 50-800t / h. In order to meet different processing needs of customers, cone crusher and dust removal equipment can be equipped.

The raw material is preliminarily crushed by the jaw crusher; secondly, the coarse material produced is transported to the fine crusher by the belt conveyor for further crushing; then, the fine crushed stone enters the vibrating screen to separate three different sizes of stones and stones, and the oversized stones return to the impact crusher for further crushing.

Advantages of Granite Process Line

The production cost of the whole production line is low. Generally, the traditional granite crushing production line needs a large amount of water for sand washing in the production. To a certain extent, the user increases the investment in water resources, while the production line does not need the investment in water, which reduces the investment in capital to a certain extent. In addition, the production line has stable operation, high production efficiency, short recovery cycle and small investment risk, which is worth the investment of users and friends.

1. The layout design of the production line is reasonable, the floor area is small and the running stability is good;

2. The overall investment is small, the income is high and the operation cost is relatively low;

3. Simple operation and high safety;

4. Simple maintenance, low cost and strong expansibility in the later stage.

Granite Crushing Processing: https://m.zenithcrusher.com/materials/granite.html

Portable crusher can be divided into crawler portable crusher and rubber-tyred portable crusher. The portable crusher plant produced by our company is the construction waste crushing equipment with the integrated combination, large output, high efficiency and convenient operation. According to the production requirements, it can have flexible configuration. After the coarse, medium and fine crushing processing, the construction waste can be crushed a certain size, and these aggregates used in roadbed stone, housing construction, cement production and other fields. Construction waste mainly includs debris sand stone, concrete, brick, steel, wood and other debris. With the processing of portable crusher, they will become the resources which can be used again. The open-air piling up construction waste after processing contributes the protection of the environment of the city, while we can also use these waste resources effectively, so as to promote the recycling utilization of construction waste.

Portable crusher has reasonable matching of various crushing equipment, and the whole production flow has reliable operation, smooth discharge, convenient operation, high efficiency and energy saving. Especially the good mobility, which can extend along with the raw material or construction sites to carry out a variety of combinations, so as to meet different production needs.

With the continuous development of economy in China, city construction waste has become more and more serious, construction problems in cities need to be solved, especially the rapid development of the current stage of urbanization, many of the city's old houses are facing the fate of being dismantled, but now many city garbage has not been fully utilized. With the development of portable crusher, construction waste has been gradually developed and utilized after the crushing process. The construction waste after crushing has become a good construction material, which is widely used in construction industry, roads and other fields.

Portable Crusher: https://www.zenithcrusher.com/portable-crusher/

Currently, China is in the peak period of economic construction, the construction waste generated in the urban transformation and village construction destroys the urban environment. The stone quarry crusher turns construction waste into the raw material of road construction and brick making, which significantly contributes to China's economic construction.

The majority of the construction wastes are mainly composed of dust, dregs, scattered mortar, and concrete, masonry generated in tick chisel, reinforced steel, metal, bamboo wood, waste generated in decoration and various packaging materials generated in the construction process, old building maintenance and removal process. For a long time, the recycling of the construction waste hasn't been paid enough attention; generally, it is shipped to the outskirts and village without any treatment, adopting air storage or landfill for processing, which not only consumes large amounts of land acquisition costs and garbage removal fees, but also results in serious environmental pollution in the collection, transport and stacking process.

We thinks that the most of the construction wastes can be reused as the renewable resources by sorting, removing and crushing by professional waste disposal equipment. After sorting, concentrating and re-melting, they can be remanufactured into various specifications of steels. Waste bamboo wood can be used to produce artificial wood. After having been crushed, brick, stone, and concrete can replace sand in the masonry mortar, plastering mortar and playing concrete cushion, as well, they can be used in the production of brick, pavement tiles, plaid brick and other building material products. Hence, in handling the construction wastes, we must take the road of comprehensive utilization.

Mobile Crushers: https://m.zenithcrusher.com/products/mobile-crusher/
Crusher Price: https://m.zenithcrusher.com/article/stone-crusher-price.html

Sand making machine is a kind of equipment which can produce sand effectively for high hardness materials. It can work alone or combine with other equipment to form a machine-made sand production line. Sand making machine can provide high-quality aggregate for the vast number of sand and stone factories. In addition, the advantages of high output, easy operation, energy saving and environmental protection, and service life factory make sand machine have a good market share in the market and widely loved by users.

So in the face of such a high demand market, how should sand making machine manufacturers do?

1. Guarantee the quality of equipment. Not for immediate benefit, but to reduce the quality of sand machine equipment, increase the quality of testing, each level set up a special person testing, the implementation of the responsibility to the people system, mobilize the enthusiasm of each employee, to ensure that each component is a quality product; equipment will be tested before leaving the factory, to ensure that the user reaches the hand is good. 

2. Guarantee equipment performance. Continuous training of technicians, focusing on personnel training, constantly introducing advanced production technology, combined with user market demand, to produce high-quality sanding machine equipment that meets user needs. At the same time, it conforms to the development needs of the times and adds energy-saving, environmental protection and intelligent elements to create a green production site.

3. Reduce the cost of equipment production. Purchasing raw materials for production equipment from specialized channels can not only guarantee the wear resistance of equipment, but also reduce the production cost of equipment. It can enjoy good advantages in the fierce market competition.

4. Improve service awareness. The service consciousness of the manufacturer is also one of the inspections whether the user chooses to cooperate with it. A good service consciousness can also show the cultural accomplishment and responsibility of the manufacturer from the side. A good after-sales service can save a lot of trouble, time and effort, and cost in the later production process.

Portable Crushers can be pulled to the material work site without installation, and directly start production operations, and the cooperation between the components is reasonable, incarnated as a small production line, high production efficiency. There are many different configuration combination models for the equipment, and Portable Crusher Plant with different crushing equipments can be selected according to the needs. Common types are jaw crusher, cone crusher, impact crusher, hammer crusher and so on. Further refinement, it is relatively complex, because each crushing equipment can be randomly combined into different forms of portable stone crusher.

Imported motor system is adopted in the portable crusher plant. The driving force is full. The tyre movable mode can reach all kinds of production sites. After entering the site, the production can be carried out directly only by extending the equipment, without the construction and installation of infrastructure, the cost and duration of energy-saving production, the operation is efficient, and the transfer is also comparable. Then, with the change of material accumulation and in-depth production. The chassis of the movable tyre gravel crusher is stable and passable. Whether it is mountainous, flat, wetland or climbing, it can pass through flexibly. The line of the steel frame body is smooth, the combination of various production equipments and the independent production line is strong. It can be adjusted according to different site requirements. In the production process, its pulse dust removal device and automatic spraying device can effectively reduce the dust in the production process, reduce environmental pollution, realize green environmental protection production, and have a good road of sustainable development.

Under these different configurations, the size of materials handled by the portable crusher plant during operation is different. You should first understand the granularity requirements of the materials in your gravel factory. In addition, you also need to provide a requirement for the output of equipment or daily output. According to your actual needs, you can recommend suitable types and models of portable gravel crusher to ensure the smooth road of your later production.

For more information about stone crushers, we're 24h online service: https://www.zenithcrusher.com/

Has overcome the defect of easy-vibration and easy-abrasion, the vertical grinding mill has gradually become the principal force of processing micro slag powders. The specific surface area of the micro slag processed by this machine is 420~450m2/kg which greatly satisfies the demands of the customers. The vertical mill researched is integrated with drying, powder grinding, powder concentrating and elevating, adopts reasonable and reliable structural design and combines with advanced technological process which completely conquers the thousands of customers of the micro slag grinding market.

Here the engineers of researching LM vertical mill will explain to you the processing course of the micro slag grinding in detail.

1. The determination of dimensions and basic parameters including the water content of wet slag, materials feeding granularity and the output of the grinding mill.

2. The main engine equipment, the output and power of the vertical roller mill, and the processed air quantity of the dust collector.

3. The storage of the materials.

(1) Wet slag: Generally speaking, the wet slag is directly sent from the slag storage yard by the belt conveyor into the wet slag cabin in the plant, and the wet slag cabin cannot be too large, and as long as it is able to hold the materials for four to eight hours in order to prevent the wet slag from caking unused for a long period of time. In addition, it is not proper to convey the wet slag with elevator because it may stick or bond in the hopper which will reduce the conveying capacity.

(2) Micro powdering of the slag: If the source of the slag is single and the quality is stable, the company may build a homogenization bank; and if there are many sources, then the company need to build two homogenization banks in order to make sure that the products delivered from the plant are stable in quality.

4. Package:

Since the micro slag is directly used in the concrete mixing station, more often than not, they are transported by the train, car or ship in bulk. If it is necessary to use bag package, the big bag package is often used and small bag packaging is not suitable from the point of reducing the cost.

5. Deironing in the system.

The vertical mill adopts outside cycling, so it is very convenient to remove the iron materials. And what is more, electric magnetic iron remover should be installed inside the mill, on the feeding belt conveyor and the coarse powder feeding part in order to reduce the iron content of the materials that are fed into the mill and reduce the abrasion.

For more information on grinding mill price, please consult: https://www.sbmchina.com/equipments/

Portable stone crusher plant is a series of rock and construction waste crushing equipment developed by our company. Its appearance greatly expands the concept of crushing operation. Portable crusher plant can be equipped with equipment such as E-break, counter-break and cone break according to production demand. Its design concept eliminates the obstacles brought by fragmented sites, environment, complex infrastructure and complex logistics to customers'fragmentation operations, and truly provides customers with efficient and low-cost hardware facilities for project operation. In the production line, the feed size required by the portable crusher plant is between 1-750 mm, and its production capacity can reach 90-450 t/h. It is mainly used in mining ore crushing, construction waste recycling, construction aggregate production, highway, railway, road and bridge construction and other industries.

2. Product Performance Characteristics

(1) Diversification of mobile and flexible combination

The portable crusher plant has compact structure and strong stability, so that the crushing station can meet the demand of maneuverability both on the work site and on the highway. Various types of machines can be quickly combined with other models to meet the different needs of production operations.

(2) Operation directly and effectively reduces material transportation costs

Each type of combined operation can crush materials on site. After crushing and screening, the finished products of materials can directly meet the customer's requirements. It also eliminates the intermediate link of re-crushing materials from the work site, which greatly reduces the transportation cost of materials.

(3) Customization on demand with strong adaptability

The portable stone crusher can be equipped with independent generators, even if the local power grid can not be used, the machine can still operate normally. At the same time, our company can customize the portable crusher plant according to the customer's site, material, particle size and other requirements.

(4) Reliable performance and convenient maintenance

The portable crusher plant adopts excellent crusher, vibrating screen and feeder with stable and reliable quality. Based on years of manufacturing experience of portable crusher plant, the crushing station has mature technology, simple operation and convenient maintenance.

Stone Crusher includes jaw crusher, impact crusher, cone crusher, mobile crusher, fine crusher, roll crusher, hammer crusher and so on.

Characteristics of stone crushing line:

They are widely used in the mine, metallurgy, building components, highway, railway, water irrigation and chemical industry. They have the features: massive crushing ratio, even granularity, simple structure, reliable functioning condition, convenient repair and economical operation.

Operating principle of stone production line :

Large dimension stones are transferred to main crusher as a result of Vibrating Feeder from hopper for very first crushing, then the crushed products are transferred to Impact Crusher via Belt Conveyor for secondary crushing. The crushed resources might be transferred towards the vibrating screen, and separated to diverse sizes. Those aggregate with ideal dimension will be transferred towards the last item pile and these with unsuitable size are going to be transferred on the Affect Crusher for re-crushing. This kinds a closed circuit manifold cycles. The sizes of final merchandise are going to be graded and separated in accordance to customers' prerequisites, plus the deduster will likely be connected for that sake of natural environment protection.

Portable Crusher Plant: http://www.zenithcrusher.com/ver2.0/Products/Crushing/Mobile-Crusher/Portable-Jaw-Crusher-Plant.html

Factors affecting the vibrating screen operation what factors influence screening process can be divided into the following three categories:
1. into the physical properties of screen material: including particle size composition, humidity, mud shape and particle.
2. the screen surface motion characteristics of structural parameters: including the characteristic extremely, the screen surface movement of the sieve length and width, the effective screen, screen size and shape.
3. operating conditions: including productivity and the size of the feeding uniformity etc.

In the above three factors, the first factor is not arbitrarily change in humidity. Second factors must be carefully considered in the design of the sieve. There are third kinds of factors can be adjusted in the actual production process. Many types of vibrating screen consists of several types of vibrating screen, in the mineral processing industry commonly used according to the structure and motion characteristics, can be divided into the following several types:
1) fixed screen: including the fixed sieve, sieve, fixed cantilever bar screen and arc sieve.
2) cylindrical sieve: a cylindrical sieve, sieve and sieve conical pyramid.
3) the plane shaking screen.
4) vibration sieve: mechanical transmission and power transmission two. The former is eccentric vibrating screen, vibrating screen, self centering vibrating screen, vibrating screen and resonance screen. The latter has electric vibrating screen.