In recent years, the number of domestic investors of sand maker machine is becoming more and more and the manufacturing technique of sand maker machine is improved every day. As a result, the requiements for sand maker of domestic and international customers is continuously high. Here our experts focus on the analysis of the whole production line of foreign sand making and factors of influencing the production line.

Firstly, we must consider the composition of the materials. In the earlier stage of sand making, we must analyze the composition of materials. If the materials contain much powder, this will influence the sand making effect. Because the powder easily adheres to others, this affects the transmission. So before the sand making, what the workers must do is to screen the materials and make sure powder mostly out of the materials to avoid affecting the normal work. The workers also pay attention to hardness of the materials. provides the sand production line, the fifth generation of the sixth generation Sand Maker and the whole sand making equipment, and every set equipment can produce different materials and its effects is different. If you do not use the matched sand making machine, the harder of the materials, the more difficult you produce the sand, with a lot worn sand torn of equipment. So the sand making effect is not satisfied.

Then the workers must have some knowledge about the humidity and viscosity of the materials. We mention much powder will adhere to other and powder will much easily adhere to others and plug in feeding entry if the moisture of materials is high, which leads to low capacity of sand making. In this situation, experts point out that the temperature of materials should be controlled well in order to reach the best sand making effect. The viscosity of the materi ls should be paid attention to practically. The materials with high viscosity will adhere to the inner wall of sand maker, so these must be clean-up timely; otherwise, the adherences will affect the operation and work efficiency of sand maker seriously. So you must choose the materials with small viscosity. These are main factors that influence the sand making effects.

We have accumulated many years of experience in the industry based on ultrafine grinding, SCM ultrafine mill production for many years of experience, the introduction of advanced manufacturing technology production concept, using more advanced industrial technology at least, make equipment for crushing material 325 mesh to 2500 mesh production process more efficient and convenient. The ultra-fine grinding mill designed by our factory has many kinds of types and models, and it can also design and manufacture suitable mill equipment according to the customer's production demand.

1. production efficiency is particularly high

The new design roller adopts the design idea of grinding ring grinding curve, which makes the grinding efficiency more efficient. When the fineness and power of the finished product are the same, the production capacity is two times higher than that of the airflow mill, the stirred mill and the ball mill. Two of the product fineness can reach D97 less than or equal to 5 mu m.

2. operating costs are particularly low

Our mill's milling accessories are mainly made of special materials, especially for the manufacture of wear-resistant parts such as grinding rolls and grinding rings, so that the utilization level is greatly improved. Under the same material and finished product fineness, the service life of the vulnerable parts of the impact crusher and turbine grinder is 2-3 times longer than that of the impact crusher and turbine grinder, especially when processing calcium carbonate and calcite, and the service life is up to 2-5 years.

3. ultra fine grinding stability is especially high

Ultrafine grinding in the mill chamber without rolling bearing and bolt, solves the problem of bearing and easy damaged seal, does not occur because the screw loose to destroy the machine phenomenon, greatly reduces the maintenance downtime and maintenance costs of equipment, equipment use more convenient and efficient.

4. The application range of ultra fine grinding is especially wide

The new ultra-fine grinding has been taken into account in various applications in various industries at the beginning of the design. Through reasonable and simple assembly, the ultrafine grinding equipment can efficiently process calcite, quartz, silica and potassium ore and other materials.

As a large-scale equipment, the noise produced by Raymond grinding mill is unavoidable, but if the sound of equipment running is too large, it will also do some harm to the life of operators and the surrounding residents. It's also called noise pollution. In fact, the noise produced in the operation of mine equipment can be reduced by certain measures. This article takes the superfine raymond powder mill equipment of the mineral processing equipment as an example to explain.

Ultrafine Raymond mill equipment is commonly used in chemical industry, metallurgy and mining industry. The noise generated by 95dB (A) can reach 120dB (A) during production. It is one of the most powerful noises in industrial production, so it must be controlled.

Which methods can reduce the noise produced during the operation of the superfine raymond mill machine equipment? The study found that there are three main methods to reasonably control the noise, they are installing sound insulation cover, sound insulation and soft sound insulation curtain isolation.

1. sound insulation cover
The sound insulation cover is the cover of the whole superfine raymond mill equipment, and the sound absorption body is added to the hood in order to eliminate the reverberation noise. This method usually obtains the noise reduction effect of 25-45dB, but it can not effectively isolate the noise from the ultra-fine raymond mill equipment to the outside world. The common sound insulation cover has two kinds of fixed and active type. Some superfine Raymond mill equipment manufacturers will be equipped with sound insulation cover randomly, but because the volume of ultrafine Raymond mill equipment is too large, this measure is poor ventilation and heat dissipation, and machine maintenance is not convenient, so it is seldom used.

2. Sound insulation
As an improvement of the method of sound insulation, sound insulation has been widely applied to control the noise of ultrafine Raymond Mill in recent years. It solves the problem of insufficient maintenance and repair space, but there is still a problem of poor ventilation and heat dissipation.

3. soft sound insulation curtain
Soft sound insulation curtain is a kind of sound insulation equipment developed, it uses soft elastic acoustic fiber materials, absorbing and insulation made of louver curtain, which has good ventilation and daylighting properties and high soft removable and simple and convenient use, especially suitable for limited space of the superfine Raymond mill equipment noise control place. This new type of noise control soft sound insulation curtain is gradually replacing the traditional rigid insulation structure, widely used in ultrafine powder Raymond mill equipment in operation.

As a new type of mechanical mining, sand maker machine has been rapid development in recent years has made remarkable achievements, we can greatly reduce the technology gap with foreign sand making machine, with the continuous development of new technologies, we have achieved good results, achieved a certain market position in foreign markets.

The rapid development of sand making machine has also led the development of related industries and progress, it provides good conditions for industrial and economic infrastructure as everyone knows, economic construction and infrastructure construction is the main task of our country, it is necessary to sand production line construction as a guarantee, in this economic environment, a sand making machine with good opportunities for development. Due to the increasing demand for sand making machine, the structural transformation of sand making machine has attracted considerable attention in our country, and sand making machine manufacturers have done a lot of research and development of more advanced equipment.

Nowadays, the market needs a lot of artificial sand. The important requirement of sand making machine is low consumption, high output and strict control of market conditions. They focus on the energy saving and efficiency aspects of the sand making machine. We can guarantee the quality of the products, reduce the energy consumption and the higher production of the products. The equipment has met the requirements of the mining market.

The design of sand making machine is the continuous innovation in the mining technology and advanced technology as the foundation, mainly used for crushing limestone, gypsum and other brittle materials, the equipment has the advantages of simple structure, high crushing ratio, low power consumption, uniform product size, high production efficiency, is the cement industry, mining and chemical industry in ideal medium and coarse crushing equipment. The power consumption of the sand making machine is 1/3 of the traditional crusher. The noise of the equipment is in the 85dB. The perfect design of the sand machine equipment can save space and reduce the cost. The series of products have a wide range of applications in the power plant, coal industry, mining, chemical industry and other related industries.