Grinding roller is a very important part in the ultrafine mill. The quality of the roller seriously affects the efficiency of production and the quality of the finished product. Therefore, we need to be more careful about this factor when purchasing. Judgment, so how can we judge its quality quickly and accurately?

We know that inside the ultrafine mill, the grinding roller is a wear-resistant part, which means that the part will wear during work. This phenomenon will continuously reduce its life, so it will be in production. After a period of use, the efficiency of the equipment will decline. Generally speaking, the wear needs to be solved through reasonable maintenance. However, to solve this problem fundamentally, it needs to start with its production materials. Generally, Said that if the material has good wear resistance, the service life of the component will be relatively long.

Now there are many types of wear-resistant materials on the market. Different types of materials will make the performance of the ultrafine mill different, and it will also make its production costs different. At this time, we need to make a reasonable choice based on the investment budget. Generally In general, the materials used for grinding rollers are all manganese 13 and their wear resistance is relatively good, but some manufacturers may use other materials to replace them for competitive advantage. Therefore, when selecting, you need to judge the material Is it manganese 13? Generally speaking, a simple and effective method is to use a magnet to absorb the grinding roller. If the grinding roller is not attracted by the magnet, it is true manganese 13, otherwise it is false, so the user is buying ultrafine grinding. When the powder machine, you can carry a magnet with you, which can effectively identify the material of the roller.

In the production process of the mill, the grinding roller is mainly used to realize the grinding process of the material, and there will be a large loss in the production. After selecting a good quality grinding roller, we must also pay attention to its maintenance in production. This can better make it serve the production process of materials.

This article mainly introduces how we can judge the quality of ultrafine mill rollers. Regarding this problem, we introduce the reasons for judging its quality, and then analyze how to judge the problem. It is to use magnets to absorb the rollers. This method is not only simple, but also effective. After selecting the appropriate rollers, we need to maintain them reasonably during production so that they can better serve the production process.

During the production process of the ultrafine mill, the air passage is blocked, which affects the production process. If it is not handled properly, it will also cause damage to the machine. No matter what kind of situation, it will affect the customer's profit problem. Therefore, it is necessary to find the cause of the air duct clogging in time and then take a reasonable solution. Here are the reasons for the air duct clogging in the production process of the ultrafine mill machine. How can we solve these problems?

Many people have different opinions about the cause of the air duct blockage. Of course, the solutions adopted are different. In order to better solve this problem, the experts of Shibang opened the specific cause of the air duct blockage phenomenon of the ultrafine mill:

The point is that during the production process, the feeder does not match the production efficiency of the equipment when the material is added to the ultrafine mill. The excessive material is added and the ultrafine powder production equipment does not process these materials in time. This leads to the clogging of the air duct. To solve this problem, it is necessary to adjust the feeding speed so that it matches the production speed of the ultrafine mill;

The second point is that the humidity of the material processed by the ultra-fine milling machine is too high, which causes the fine powder to adhere to the air duct, which will cause clogging in the long term. Therefore, pay attention to the screening of the material during production or dry it before putting it into the material.

The third point is that during the production of the ultrafine mill, due to the sudden power failure or shutdown, the fan of the ultrafine mill did not run normally when the ultrafine mill was started, which caused the air duct to be blocked. To solve this problem, it is necessary to start the equipment first. Observe whether the fan can run normally and then put the materials into production.

There are several reasons for the blockage of the fan of the ultrafine pulverizer introduced above, and solutions are given for each cause. In the actual production line, the causes can be eliminated one by one according to the faults of the ultrafine pulverizer and then resolved to help The equipment works more smoothly.

During the production of ultrafine grinding mill, its performance in all aspects will be affected by various factors, which will lead to the decline of the output of the equipment. One of the factors is the difficulty of material feeding, which makes it difficult for the ultra-fine grinding machine to receive continuous and uniform feeding, and its production process will be inevitably affected. In order to solve this problem, we must find out the reasons for the difficulty of feeding. The following is the problem of ultra-fine grinding The pulverizer Manufacturer & mdash; & mdash; Shibang machine will analyze for us what causes the feeding difficulty in the production of ultrafine pulverizer.

Like other types of grinding equipment, the ultra-fine grinding machine also has certain requirements for the feeding, and because the equipment is used to produce ultra-fine powder, the requirements for the feeding are more stringent, so when the feeding does not meet the requirements, it will cause the problem of difficult feeding. The feeding does not meet the requirements are mainly the following situations: the feeding speed is too fast, the material moisture content is too large As well as the blockage of discharge pipe, only these problems can be solved to solve the problem of difficult feeding.

In order to solve these problems, we should first operate according to the factory instructions, control the feeding speed, and feed according to the requirements of the equipment for material humidity. We should not put materials with too much water content into the equipment for ultrafine powder production. In addition, we should check the discharge pipe regularly. If any foreign matter is found to be blocked, we should clean it in time to ensure the smoothness of the discharge pipe, so as to ensure the ultrafine grinding machine Production goes well. The above summarizes several reasons that lead to the feeding difficulty in the production of ultra-fine grinding machine, and gives the solution, mainly according to the instructions to carry out appropriate operation and ensure that the feeding meets the requirements and the discharge pipe is smooth, which can solve the problem of difficult feeding, and then solve the problem of the impact on the equipment output.

Ultrafine grinding mill is equipped with environmental noise reduction device, usually not more than 80 db of noise under normal circumstances. But if the mechanical parts loosening or failure, it will cause excessive noise. The experienced operator distinguish according to noise of machine.Excessive noise of ultrafine mill is mainly about several situations:

• 1.Loosen of bolt screw causes severe vibration of grinding mill.
• 2.Excessive feeding, it will also lead to severe vibration mill, generate noise.
• 3.Serious abrasion of blade leads to unbalanced blade and friction.
• 4.Check the grinding ring and roller. Badly worn roller can no longer rotates smoothly on the ring lead to noise.
• 5.Check whether there are accumulation of dust on the fan blades, which leads to rotating deviate from the center and vibrating.
• 6.Check whether the fan blade is in abrasion, if any should be replaced.

ultrafine grinding mill made by SBM is a kind of new environmentally friendly equipment. The entire system has noise reduction during processing, working in a closed room for preventing the spread of noise. In addition, ultrafine grinding mill is also equipped with dust removal equipment, and exhaust emissions is in full compliance with national environmental requirements. It is ideal equipment for powder processing .

The pulverized coal raymond pulverizer needs to be stored when it is not in use, but during the storage process, it is necessary to ensure that the equipment is not affected by the environment and that it is safe and sound, so that it can better adapt to the future In the production process, we must ensure that it is not affected by the environment and do some necessary work. Let us introduce the main tasks.

The first is the storage place, which is where the raymond mill is placed. Generally, in order to avoid direct sunlight and rain, it is generally placed in a dry room, and the ground is flat and covered with wooden boards. This can further reduce the environmental impact;

The second is the maintenance during storage. This mainly refers to the inspection of the parts of the ultra-fine mill and the waterproof paint on the surface at regular intervals. If there is a problem, it should be repaired in a timely manner and then run regularly. See if anything goes wrong;

Once again, the storage of the engine. The engine's role in the operation of the pulverized coal raymond mill is to provide driving force, so the work to be done during storage is to drain the water from the machine before storage, and then The engine oil is replaced and it is launched once a month to prevent rusting;

The storage of the battery is generally followed by removing it for storage. When disassembling, pay attention to the problem of cutting the negative wire first, and then cut the positive wire. When installing, connect the positive electrode before connecting the negative electrode;

Summary: This article mainly introduces some operations that need to be performed when pulverized coal raymond mill equipment is stored, mainly in four aspects, one is the storage location, the other is the maintenance during storage, and then the engine and battery These aspects are to avoid the impact of the environment on the raymond mill during storage and prevent rust and other failures.

Recent years, the producting technology of sand making machine has not been the industrial secret, but it is the first time to apply solar energy in sand maker. As we all know, the sand making machine is always exposured in the sunshine for the whole day, so it's not impossible to use the solar energy to charge its generator.

Solar Energy, usually refers to the sun radiation Energy, in the modern society, generally used for power generation. Since the earth created creatures, those creatures depended on the heat and light of the sun, band also human beings knew to dry the objects in the sunlight, by which they kept food, such as salt-making and drying of salted fish, etc. But with the reduction of fossil fuel resources, then people are disposed to develop solar energy further. The methods of solar energy using include passive use (solar-thermal conversion) and photoelectric conversion . Solar power is a new kind of renewable energy. In the broadest sense, the solar energy is the resource of much earth energy, such as wind power, chemical energy, water potential energy and so on.

Solar energy comes from the earth's outer universal bodies (mainly solar), most of the energy human need is directly or indirectly, from the sun. Rightly all kinds of plants, through photosynthesis, convert solar energy into chemical energy, storing the energy in plants body. Coal, oil, natural gas and other fossil fuel ware formed from the buried plants and animals under the ground after a long geological generation. These are, in essence, the fixed solar energy of those ancient creatures . In addition, hydropower, wind energy, are also transferred from the solar energy. The solar power system, the earth itself, reserves of energy which usually refers to the energy related with the interior earth heat energy and that relevant nuclear core source energy.

And what is related with the nuclear reactions is nuclear power. When the structure of the nucleus changes, it will release a large amount of energy, called atom nuclear power, hereinafter referred to nuclear energy, commonly known as the atoms power. It originated from the nuclear fission resource from the uranium and plutonium in the procedure of nuclear fission reaction , including the fission can resources of the tritium lithium deuterium stored in the sea. These substances release energy during nuclear reactions . At present the biggest use of nuclear energy is generating electricity. In addition, it can be used for other types of power supply, the heat source, etc.

Through the introduction, we know that the sand maker applies solar power to generating electricity, so as to achieve self-sufficiency, which is completely feasible. If you are interested in our product, call our customer service number for detailed questions.

The problem of powder in the production process of raymond mill equipment has always been a problem that people are more concerned about, because whether the powder is not produced or the powder spray phenomenon has a certain impact on production, it will cause the equipment to be shut down and repaired, which will cause production The decline in efficiency and increase in operating costs are harmful to the overall production efficiency. Therefore, only by solving this problem can the equipment serve the production better. Let's introduce what causes the raymond mill to fail. Powdering or dusting.

First of all, the phenomenon of no powder is generally caused by the laxity of the unloader, because the raymond mill uses circulating air during production, and the circulating air needs to reach the gas-solid through the separator. Separation. If the separator has positive and negative pressure at the same time, the feeding opening will not be tightly closed, which will cause the phenomenon of no powder. Therefore, only the sealing of the feeding opening can be used to solve the phenomenon of no powder.

The second is the phenomenon of dusting. This is mainly due to the fact that a certain amount of heat is generated in the production process of the raymond mill, and this heat and excess air volume need to be discharged through the dust collector to the circulation system. It will be discharged from the feed port, which causes the phenomenon of dusting from the feed port. To solve this problem, it is necessary to clean the dust bag regularly, or a fully automatic pulse dust collector can be used.

The phenomenon of powder in the production process of raymond mill equipment is mainly the phenomenon of no powder or powder spraying from the discharge port. The reasons and solutions for these two phenomena were found above. The main reason is that the discharge port is not protected from wind. Strict and dust collectors can not rule out the excess air volume and heat. It can be solved according to these two reasons in production. Only when these two problems are solved can the raymond mill work better.

Recently, due to the vigorous improvement of infrastructure in China, the demand of gravel is increasing rapidly. With the gradual decline of domestic natural sand resources, the pressure on sand making industry market has directly increased as well as the demand of sand making equipment. Most of domestic crusher manufacturers make the most of this good situation to take up more market shares. Our company has grasped this opportunity to provide high quality products and after-sales service for its better development.

In china, artificial sand making equipment are always roll crusher, hammer crusher, CI5X impact crusher, compound crusher and tertiary impact crusher, among which roll crusher and hammer crusher are gradually eliminated by the market because of their inferior quality of artificial sand. Tertiary impact crusher can produce aggregates in excellent quality and it also has other advantages such as high crushing ratio, strong crushing capacity and low energy consumption, which has become the indispensable crushing equipment of artificial sand production industry.

Our company tertiary impact crusher is suitable for crushing brittle materials of medium hardness. When compared with traditional sand making equipment, it has higher efficiency and wider range of applications. In the construction field, tertiary crusher is the ideal equipment for producing artificial sand, asphalt concrete, cement concrete and cushion materials. In mining industry, the preceding process can be applied to the grinding of iron ore in order to reduce the high-cost grinding load, so it is the best equipment for high corrosion and secondary crushing. Tertiary impact crusher also can be used in construction waste disposal.

The production of ultra-fine powder mill not only introduces advanced foreign technology, but also combines the use of our country, so it is a very suitable equipment for the needs of the powder industry in our country. It exists for processing fine powder and requires a feed of 30 mm. Right and left, at the time of production, as long as the feed meets the requirements of the machine, it can be processed. The finished product particles are smaller and are called fine powder.

With the continuous development of the milling industry, the demand for powder products is constantly changing, not only the required fineness is changing, but also the quality requirements are constantly changing. So for equipment such as ultrafine grinding mill, The material properties that it can produce are limited. Similarly, its discharge port can only be adjusted within a specific range, so the fineness of the finished product is also within a specific range, so not all fine powders can be used. Produced using an ultrafine mill.

So how to solve this situation? That is to develop some machines that meet the production requirements according to market demand, such as vertical mills and micro-mills. These two types of equipment are relatively finer than the ultra-fine mills. Machine can meet the demand for fine powder on the modern market.

This article mainly introduces the problem of whether the ultrafine milling machine can be used to produce all fine powders. Through the introduction above, we can find that it is not possible. The fineness of the finished product that can be processed by this type of machine is In a specific range, to meet more production needs, more different mills are needed to achieve it.

With the vigorous construction of infrastructure nationwide, the demands for sand and stone aggregate increase. Natural sand is no longer able to satisfy the market demands, so that the demands for artificial sand are higher and higher. Next the technicians from SBM will fully specify the technical process of sand making machine.The sand making production line is mainly composed of vibrating feeder, jaw crusher, vertical shaft impact crusher, vibrating screen, sand washer, belt conveyor and central electricity control. The designed output is generally 50-500 t/h. Through many years of research and development, SBM combines vertical shaft impact crusher with international advanced level with other series of products of our company and designs a whole set of sand making production line, which takes a lead in the sand making industry.

The technical process of sand making production line: stone materials are evenly sent by vibrating feeder to jaw crusher for primary crushing. The coarsely crushed stone materials are sent to fine jaw crusher for further crushing. The crushed materials are sent by belt conveyor to vibrating screen for screening. The stone materials that satisfy the feeding granularity of sand maker will be sent to sand maker for making sand, and the rest that do not satisfy the feeding granularity requirement of sand maker will be returned to fine jaw crusher to be crushed again. The materials discharged from sand maker will be returned by vibrating screen for re-screening, and the sand that satisfy the requirement will be sent to sand washer for washing and the washed final products will be sent by belt conveyor to become final products. This production line can form two-stage closed-circuit cycle, and according to the customers needs, different configuration methods can be used.

Our sand making production line has the features of high automatic degree, low running cost, high crushing efficiency, energy conservancy, high output, little pollution, simple and convenient maintenance and the produced artificial sand conforms to the national building sand standard, even granularity, good particle shape and reasonable grading. This sand making production line has been put into use in many production sites and is proved to be the optimal choice for manufacturing artificial sand.