The production of vertical roller mill is inseparable from the screeb and other equipment, these different equipment to assist the material production process, their role in the work of different, but leave any one machine, can not successfully complete the material Production, so for the failure in production to be timely processing, here to analyze the vibration of the side plate cracking how to deal with the problem.

Vertical roller mill is an important auxiliary equipment in the production of vertical roller mill. Its existence plays an important role in material grinding. If the equipment fails during working, it will cause a great deal of production Impact, so we have to promptly solve its problems, one of the common phenomenon is the phenomenon of cracking the side panels, this phenomenon how to solve it?

1) First check whether the hexagonal bolt connection in the crack area is reliable. Remove the riveted bolts on both sides of the side plate and the upper stiffener to check for damage between the angle plate and the mating face on the plate. In the case of qualified surface to ensure that both sides of the crack plate alignment, the production conditions to ensure that the screeb to make better to help vertical roller mill production process;

2) Grind a bevel along the entire length of the crack center (inside the sieve) along the crack perpendicular to the direction of the frit. The welding torch can not be swung. It can be welded in 2 stages and be struck with a needle gun after each weld to eliminate Stress and welding slag, continuous vertical welding, each seam with a needle gun hit, until the welding is completed, you can handle the way to be able to better solve the production of vertical roller mill, screeb cracks caused by the impact on production;

In 2008, the Beijing-Tianjin Railway opened. Since then, China's high-speed railway construction is out of control. Both the Wuhan-Guangzhou high-speed railway and the Zhengxi High-speed Railway have entered the operation phase. Currently, the Daixi High-speed Railway under construction is the main north-south route in Province.

Therefore, This is an excellent way for the development of Raymond mill. Therefore, the development of China's high-speed railway industry can be said to promote the development of China's milling industry.

The rapid development of high-speed rail has brought huge improvement effect to the regional economy for all to see. Moreover, the processing and production of high-speed railway projects with gravel has become the hottest investment project at present.

The construction of high-speed railway has also promoted the rapid development of the machinery industry The power of infrastructure is increasingly strengthened. Nowadays, the machinery and equipment of various industries are opening up the market without exception. The market for sand making machines is the most extensive.

At the same time, the mill also plays an unshirkable role, And the development trend is more rapid, the main line of the Daxi High Speed ​​Rail in Province, manufacturers have unique advantages, especially Raymond mill manufacturers, to a certain extent, save on transportation costs, but after all, or to choose experience Rich and have a good reputation of the vendors, cost is also a very important factor, if the outstanding manufacturers in the field are not afraid, because now there are many high-tech equipment, mobile equipment applications are also quite extensive, so the distance is not a problem.

The problem of excessive particle size in the production of vertical roller mill may be due to spring wear or spring and high pressure plate itself is too large, so need to replace or adjust the spring, and between the spring and the high voltage plate The gap is generally kept between 15-20 mm;
The second point: the problem of bearing heating that occurs in the production of vertical roller mill generally requires the operation of bearing lubrication or replacement, and the tightness of the upper cover must be ensured.

The phenomenon of abnormal vibration appearing in the production of ultra-fine mills may be due to the size of the feed material or uneven wear, unbalanced grinding rolls, improper foundation treatment, etc. Therefore, it is only necessary to ensure proper feed particle size. And replace the wear parts to ensure the stability of the foundation, such as checking the anchor bolts and strengthening.

The above is a detailed introduction to the content of high quality and routine maintenance, so customers only need to select high quality equipment and maintain equipment according to the manufacturer's requirements to ensure that the equipment brings good production benefits to the production process.

when ultrafine mill works, the influence of material properties on production capacity is very intuitive. Therefore, we must select reasonable materials according to the model requirements of the production line to ensure hardness, humidity, viscosity, size and other aspects. The nature of the production meets the needs of the production

The first point is that the size of the air volume is directly proportional to the capacity. It means that the larger the air volume is, the greater the production capacity will be in the production process. Therefore, if you want to increase the production capacity, you need to be able to The amount of air volume is set reasonably

The second point is to ensure a reasonable operation. This mainly refers to the standardization of operations, as long as the instructions for the operation are followed according to the time of shipment. In this process, in order to better ensure the production process, we also need to ultrafine mills perform reasonable maintenance, such as lubrication, overhaul, etc., all of which have a definite cycle. If problems are found in the cycle, if problems are discovered and repairs are made in a timely manner to avoid the occurrence of failures, this is also an increase in productivity.

The article mainly introduces the problem that hot air energy cannot improve the productivity of ultrafine mill. The detailed analysis and comparison of this point above cannot be followed by the introduction of the operations that need to be carried out in order to increase production capacity, mainly the adjustment of air volume. The normality of operations, the nature of operations, and the nature of incoming materials in production, these aspects have a very important impact on the production process, and we need to exercise caution in order to ensure the expected production results.

The pace of social development more and more quickly, the provinces of urban construction are also carried out in full swing, concrete materials, highway ingredients and so on are inseparable from the sand and stones, and these sand and stone are in need of sand making machine to complete, so that the sand making industry is the basic industry of a country, is the backbone of promoting the development of the national economy.

The national industrialization process constantly accelerating, urban expansion, relocation and repair process also will have a large amount of building waste, broken broken recycling of construction waste machine use if, will not only greatly to solve environmental problems, will also avoid a large part of the waste of resources, at the same time, it also further stimulate the development of crusher and sand making machine, provides a better path for sand industry, since the State prohibits the natural sand mining, mechanism of sand has been in people's life plays an important role and status of sand making machine in the system of sand production line also nots allow small gaze.

sand machine efficient determines the gravel sand machine production line efficiency, sand production line profit is the production of customer value, but also absolutely can not select low weathered sand to increase profits, in fact, consider a number of factors, there are many ways to cut costs, and also can obtain larger profit.

The first point is the three-dimensional structure of the mill, making it a smaller footprint, and this complete set of production equipment, from the block to the finished product powder into a separate production system, this system can effectively reduce the production of land Area, but also can effectively reduce the damage caused by the installation of operational errors and so on, for the production of LUM vertical roller mill equipment or investment, are more favorable;

The second point is in the structure, the host of the transmission device uses a sealed gear box and pulley, smooth transmission, reliable operation, this smooth operation, is conducive to vertical roller mill efficiency and reduce the failure, the other The advantage is that the fineness of finished powder is even and the passing rate is 99%. This advantage is difficult to be achieved by other production machines, and it is also an important reason that the machine is welcomed in the vast industry.

The article mainly introduces the structural characteristics of vertical roller mill. The above analysis is mainly based on the structural drawing of this machine. This is mainly for the internal structure. The gas characteristics are stable running, high screening rate, and then Advantages of the appearance of possession small footprint, these advantages become the aircraft in the industry the main aspects of the popular.

The reason why a large-scale carbon black ultrafine grinding mill manufacturer can take a place in the market and can withstand the changes in market demand depends not only on the quality of the machines, but also on the strength of the manufacturers. To analyze the problems of the advantages of large-scale carbon black mill manufacturers.

The reason why a large-scale carbon black ultrafine mill can take a place in the market and can stand the change of market demand depends not only on the quality of the machine, but also on the strength of the manufacturer's excellent strength. This article should be analyzed. What are the advantages of the large carbon black mill manufacturers?

In the work of ultra-fine carbon black grinding, the carbon black material is sent to the middle of the grinding roller and the grinding ring. The material is broken into powder under the action of the grinding pressure, and then the powdered material is blown under the action of the fan and analyzed. Machine, to reach the fineness requirements of the material through the analyzer, can not meet the requirements of the re-grinding chamber to continue grinding, after screening, only qualified, overall carbon black production equipment output of carbon black mesh reached 1250 It is very convenient for the adjustment of the number of meshes. This is the unique feature of the large-scale carbon black ultrafine mills.

ultrafine mill: http://www.boyukgalahotel.com/

In addition to high speed with the mechanism of sand production line at reasonable prices, there are many advantages of high speed of sand maker machine, the most important point is that the grinding ratio compared with other grinding machine is much higher, the general grinding ratio can reach 10 ~ 25, high grinding ratio will reach 50.

In addition, the high speed of sand making machine high production capacity, product uniformity, crushing phenomenon is less, the energy consumption per unit product is low, simple structure, light quality of the equipment, easy operation and maintenance, and thus have many manufacturers like them.

The reason why to high-speed sand making machine reputation so good, the reason lies in the high speed railway system sand equipment price, and this kind of grinding machine is currently the best stone machine, use scope is extremely widespread, to all kinds of rocks, concrete aggregate, refractory material, grinding, whether hard or brittle materials the material has high speed sand making choice is right. Grinding equipment with high speed sand making machine is represented by its excellent performance make it has a good reputation in the market, at the same time also improved innovation constantly.

After analysis of this user kaolin material, many experiments, the Shanghai world state of the milling machine experts to design a reasonable mill production line configuration. Combined with this example, the following summarizes the following several factors affecting the working efficiency of ore milling equipment machinery: 1. Mill wear parts materials. ore milling equipment with wear-resistant materials and wear-resistant materials affect the efficiency of the mill discharge quality. 2 product humidity. ore milling equipment machinery suitable for handling humidity below 6% of the rock. In general, the moisture content of the product will lead to adhesion within the ore milling equipment, will also cause blockage in the feeding process, greatly reducing the ore milling equipment capacity. 3 product hardness. In general, as the hardness of the material upgrade the difficulty of milling will increase, and the more ore milling equipment abrasion wear faster. For the nature of the material, choose the right mill equipment. 4. The composition of the product. If the discharge requires more fine powder, it should be a sieve before milling to prevent the powder from sticking inside the ore milling equipment, affecting the delivery. 5. Product viscosity. As the viscosity of the product the greater its adhesion, will affect the efficiency of ore milling equipment.

The energy problem, always as a big problem of nation building, especially in recent years, the shortage of energy is serious, more make energy saving and high efficiency was put on the agenda. Crusher, the most critical equipment, the development of new energy use in and even the whole country with a wide range of applications.

As one of the modern new city, the development and construction of fast need plenty of energy supply, therefore, crusher equipment emerge in an endless stream, various s of crusher equipment meet the eye everywhere, so for the stone machine, we make the following introduction: first, construction waste crusher manufacturer points out, national attention, will make crusher industry healthy and rapid development.

In recent years, the state control policies continue to advance, associated livelihood issues is in the priority position, solving these problems will promote the development of crusher equipment field, which is due to their need for raw materials, crusher equipment can meet the requirements of different particle size of sand in the construction process of sand, particle size uniform, and some equipment in the broken after the sand grain is very good, for example, crusher, construction waste crusher, which are relative to the natural sand and natural sand resources advantage, to reduce unceasingly, need artificial sand replenishment.