The production of vertical roller mill is inseparable from the screeb and other equipment, these different equipment to assist the material production process, their role in the work of different, but leave any one machine, can not successfully complete the material Production, so for the failure in production to be timely processing, here to analyze the vibration of the side plate cracking how to deal with the problem.

Vertical roller mill is an important auxiliary equipment in the production of vertical roller mill. Its existence plays an important role in material grinding. If the equipment fails during working, it will cause a great deal of production Impact, so we have to promptly solve its problems, one of the common phenomenon is the phenomenon of cracking the side panels, this phenomenon how to solve it?

1) First check whether the hexagonal bolt connection in the crack area is reliable. Remove the riveted bolts on both sides of the side plate and the upper stiffener to check for damage between the angle plate and the mating face on the plate. In the case of qualified surface to ensure that both sides of the crack plate alignment, the production conditions to ensure that the screeb to make better to help vertical roller mill production process;

2) Grind a bevel along the entire length of the crack center (inside the sieve) along the crack perpendicular to the direction of the frit. The welding torch can not be swung. It can be welded in 2 stages and be struck with a needle gun after each weld to eliminate Stress and welding slag, continuous vertical welding, each seam with a needle gun hit, until the welding is completed, you can handle the way to be able to better solve the production of vertical roller mill, screeb cracks caused by the impact on production;