In the vertical roller mill deposit, heavy minerals usually does not exceed 1-3 kg/m3, and the rest are gravel, pebbles, sand and clay. Clay is not good for the fine-grained gold recovery process and should be removed before the gold selection process.

Gold is mostly in the form of granules, flakes and branches in the vertical roller mill deposits, its size generally in the range of 0.2-2mm.Characteristics of vertical roller mill1 Low gold content, generally 0.2-0.3g/m3, and the content of heavy mineral (S>4) is usually 1-3kg/cm3.

The maximum particle size of gangue ore is often several thousand times larger than the minimum grain size of vertical roller mill. That is to say, raw ore of sand gold is in large size, it is necessary to pick out the gold-free gravel and reduce the size of the ore containing ore.

The vertical roller mill separator and the louver ring are one of the important internal parts. When they are working, they will also encounter some problems. The solution of these problems is an important condition to ensure the smooth operation of the machine, and then for these parts The maintenance of these two parts is also very important, so that failures can be prevented in time. In this article, we are going to analyze the maintenance of these two parts.

In the interior of the vertical roller mill, the material after the sorter is ground and dried enters the part along with the air flow from the lower part for sorting operation. The purpose of sorting is to obtain a better quality of the finished product. There are moving and static blades, and the welding must be firm, otherwise it will cause accidents such as downtime. The maintenance of this part is divided into the inspection and repair of the moving blades and the static blades. 

The basic principle is developed and designed so that the quality of the finished product can meet the different needs of users. At the same time, the overall cost of the limestone ultrafine vertical mill production process is much lower than before, which can reduce expenses and reduce overall energy consumption for users.

At present, the new ultrafine vertical mill production line has been added to the dehydration process, which is more efficient on the basis of the traditional production line operation. The dewatering process can help the limestone grinding production equipment to be dried, which can also effectively reduce energy consumption.

vertical roller mill operation: https://www.gravelmill.com/solutions/vertical-roller-mill-operation.html 

How to respond to the call for modern green production, how to save energy and protect the environment, continue to conduct research, so that the production line can continue to make breakthroughs in innovation.

After development, Zenith wollastonite vertical roller mill is widely used in the production demand of wollastonite powder, limestone, barite, marble, phosphate ore and other industries. Moreover, the principle of the mill is scientific, and its cost-effective ratio is high. It has become a mill equipment to assist the power powder project to create productivity.

As high-efficiency and energy-saving mill equipment, the vertical roller mill is renewed and replaced on the basis of the traditional mill. Its grinding fineness is between 80-600 mesh. It can effectively improve the output of single equipment, reduce unit energy consumption and create benefits for more and more grinding projects.

So, what is the composition of the mill equipment? Complete equipment system is mainly composed of main engine, feeder, classifier, blower, pipeline device, hopper, electronic control system, collection system, etc. It adopts plum blossom rack and vertical pendulum roller grinding device.

 

Zeolite has a unique internal structure and crystallized chemical properties, with adsorption, ion exchange, catalytic and acid heat and other properties. In addition to chemical reactivity, far-infrared radiation, reversible dehydration and other ultrafine vertical mill process performance.

At present, zeolite has been widely used in agriculture, petrochemical, building materials, ceramics, metallurgy, pharmaceuticals, catalysts, detergents, environmental protection, daily chemical and other fields.

Zeolite has a unique pore and channel microstructure, is a long-term use as a molecular sieve minerals. The pores and channels of the zeolite and the calcium ions in it can also interact with human blood, activate thrombin in the blood, and bind them tightly to keep the blood coagulation and stop bleeding within 12s.

Other usage of zeolite such as zeolite-made inside wall material was considered the most safety inorganic material; zeolite makes LED lighting cheaper and more efficient; zeolite synthesis time is shortened to a few seconds.

Ultrafine vertical mill powder generally applicable to the plastics industry , paper industry, construction industry, artificial marble industry drilling industry with the floor , feed industry manufacturers ultrafine vertical mill price , ultrafine vertical mill powder and putty powder coating industry.

Dry mortar with heavy ultrafine vertical mill heavy calcium requirement of not less than 325 mesh heavy calcium , whiteness requirements: 95% ultrafine vertical mill content : 98% ) of ultrafine vertical mill has an important role in the construction industry can not only reduce the concrete production costs, but also can increase the toughness and strength of the product.

Artificial marble with heavy ultrafine vertical mill ( ultrafine vertical mill powder ) : Requires ultrafine vertical mill powder fine mesh bottom in 325 to 400 mesh , whiteness requirements: 95% ultrafine vertical mill content : 98.5 % pure unadulterated ) has been widely used ultrafine vertical mill artificial marble production.

 

Associated minerals In addition to gold, ultrafine vertical mills also contain a variety of heavy minerals, which associated with gold, magnetite, ilmenite, rutile, garnet, zircon, hematite, chromite, olivine, epidote, pyrite, monazite, limonite, platinum, antimony, cinnabar, wolframite, scheelite, cassiterite, corundum, diamond, mercury paste, galena, etc.

In the ultrafine vertical mill deposit, heavy minerals usually does not exceed 1-3 kg/m3, and the rest are gravel, pebbles, sand and clay. Clay is not good for the fine-grained gold recovery process and should be removed before the gold selection process.

Gold is mostly in the form of granules, flakes and branches in the ultrafine vertical mill deposits, its size generally in the range of 0.2-2mm.Characteristics of ultrafine vertical mill1 Low gold content, generally 0.2-0.3g/m3, and the content of heavy mineral (S>4) is usually 1-3kg/cm3.