How do you feel in relation to faucet repair?

5 Main Types of Plumbing Pipes Used in Homes Whether hiring a plumber or taking on a do-it-yourself plumbing project, the experience can be confusing because of the choice of several types of plumbing pipes. Eventually, pipes' uses tend to blend together. Which type of pipe should be used for water supply, drainage, sewer, and even for the exterior? The answer is not as clear as it may have been in the past when the main pipes of choice were galvanized steel or cast-iron.     PEX Pipe PEX, or cross-linked polyethylene, pipe is one of the newest and most popular pipes to hit the plumbing market. PEX is used only to supply water. PEX is a pipe that is rigid enough to withstand the pressures of water supply but flexible enough to weave throughout walls, ceilings, basements, and crawlspaces. PEX has truly delivered water-supply plumbing into the hands of do-it-yourselfers and professional plumbers.   Pros

• Color-coded red for hot water and blue for cold water
• Highly flexible, with 90-degree curves possible
• Attaches with push-fit plumbing fittings, among other types
• Inexpensive
• Able to join with copper pipe
• Cuts easily

Cons

• Long-term capabilities untested
• May leak with push-fit plumbing fittings
• Cannot be recycled

    PVC Pipe PVC, or polyvinyl chloride, pipe is a drain or vent line type of plumbing pipe. PVC initially gained popularity because it was lighter and easier to work with than traditional galvanized steel pipe. PVC pipe is moderately easy to install and requires little more than a hacksaw and a miter box to cut. PVC glues together with solvents.   Pros

• Diameters clearly marked on the white surface of the pipe
• Inexpensive and can be used for long runs such as for irrigation
• Easier to work with than steel or copper

Cons

• The pipe cannot be unjoined and must be cut
• Glued pipes can be prone to leaking
• Degrades in sunlight

    Rigid Copper Pipe Rigid copper is often used for water supply lines within the home. Rigid copper is easily cut with a hacksaw or with a special copper tube cutter. The connection is a different matter, as it requires a practiced hand to solder copper pipe together. Rigid copper pipe is great for water supply because it does not come with any health risks.   Pros

• Though it is called rigid, this pipe can be slightly bent
• Handles heat well
• Stands up against intense pressures
• Easy to recycle and waste copper pipe even has monetary value

Cons

• Difficult for do-it-yourselfers to work with due to soldered connections
• Expensive
• Develops pinhole leaks
• Inside of pipe may eventually corrode and impede water flow

    ABS Pipe ABS (acrylonitrile butadiene styrene) pipe is mainly used as a vent and drain line. ABS pipe looks very much like PVC pipe, except that it is black and slightly softer.   Pros

• Stronger than PVC pipes
• Good for underground exterior use
• Works well in cold temperatures

Cons

• Often not permitted by building code
• Warps and deforms at certain temperatures

    Flexible Copper Pipe Flexible copper pipe or tubing is used for final runs to water heaters, refrigerators, and some sinks. Flexible copper is used only for short runs and can be cut with ease with a hacksaw. It can be bent to fit around corners.   Pros

• Fits in tight, unusually shaped areas
• High heat tolerance

Cons

• Expensive
• Thin and prone to breaking

    Galvanized Steel Pipe and Cast Iron Two additional types of pipe are sometimes found in older homes and are infrequently installed, especially by do-it-yourselfers: steel and cast iron pipe.   Galvanized steel pipe was used for decades for drainage, water supply, gas supply, and any number of other purposes. While galvanized steel pipe is still around (particularly for gas supply) it is far less used and is never used for water supply in new construction or remodel projects. Each end of the pipe is threaded, and individual pipes are screwed into each other with connecting joints.   Cast iron pipe was often used for sewer and other drainage purposes. Cast iron pipe is still found in many homes. Cast iron pipe is viable until the point that it rusts completely through. Cast iron is very heavy and difficult to cut. Retrofits tend to replace cast iron pipe with rigid plastic pipes such as ABS.   Pros

• Galvanized steel pipe has the advantage of being extremely strong.

Cons

• Galvanized steel pipe eventually corrodes and blocks water flow.
• Some galvanized steel pipe may pass lead into the water supply.

https://www.thespruce.com/basic-types-of-plumbing-pipes-1822487

Plumbing Service Contractor Near By

There are two things that come into your mind when plumbing work is needed. Can you try it for yourself, or should you get in touch with a professional? Any time you need a plumber, call us plumbing service

In the event the issue includes natural gas, then it is safer to have a heating professional for assistance. If an inspector will check the work, it is more likely to pass if it’s serviced by a licensed professional. If you do it on your own though would you call up the inspector? If you think the quality of your works is questionable, then get your problem serviced by a licensed plumbing company. Call them now for a quotation.

How to Locate These Local Plumbing Providers

Open your local papers and you might locate these plumbers advertised as they tend to work near their home. In Yellow Pages too, you can find them listed. Needless to say, the social media also. You can make use of the internet search engine also simply by browsing key terms such as “plumbing” or “plumber” with your area included in it like for instance “plumbing Vancouver”. If you are in their web page, among the signs of a great company is a well-designed website.

What’s Call-Out Charges

Once you have contacted a plumber, the majority of them generally offer you a quotation for a particular job. Plumbers who reach your location to work on your plumbing usually requested a “call-out fee” if you turn them down. It’s a common practice among plumbers to demand a call-out fee even though they don’t like charging it. They rather concentrate on the work at hand but time and fuel is involved here so this occurs.

It will last for very long so ensure that you work with an expert plumber. Ask the company not to send an apprentice so they can send you the most experienced of them all.

Maintenance Needed: Just the Basic Ones

While the plumbing technician is there, ask what you are able to do to prolong the life of your furnace or perhaps the hot water tank. There are a couple of simple things you should know like how often to replace the filter on your furnace, or if you would benefit from a much better air filter system.. If you have radiant heat that has its own schedule for upkeep. It’s beneficial to have proper scheduling of maintenance to your major appliances.

The suggested schedule to examine a gas furnace is every two years. You could also extend the life by checking the water tank too.

Shamrocks Plumbing and Heating
1325 Elwyn Rd, Kelowna BC, V1X 5M9
Ph: (250) 575-8138