In order to ensure the production efficiency and the grinding effect of the mb5x pendulum roller mill in the winter, we need to take some special operation methods, because the use of the machine is affected by the environment, so winter protection measures are indispensable Yes, here is to introduce these protection measures.

1. If conditions permit, try not to operate the grinding mill outside, because the temperature in winter is relatively low, and the equipment is more troublesome when operating outdoors, such as preheating operation when starting the machine, and its lubricant The freezing point needs to be lower, which is detrimental to the production efficiency of the equipment and the investment in operating costs. If the conditions do not allow, be sure to preheat the idling before starting up, because if the temperature is lower, the toughness of the metal will be Reduced, it will be normal after preheating, otherwise, the equipment will not only have low efficiency, but also affect the service life;

2. Another feature of winter is the strong wind. If you are working outdoors, you should pay attention to the dust bag of the ultra-fine mill. It is affected to a greater extent, and this situation also has a greater impact on the phenomenon of dust spillage during the operation of the equipment, which will cause unreasonable environmental protection of the equipment;

3. Lubrication work should be carried out at any time. In winter, due to the low temperature, it is recommended to use butter or antifreeze oil, so as to ensure that the bearing will not be damaged during the work, the bearing is in good condition, and the equipment can be guaranteed to work Proceed smoothly to ensure its efficiency and longevity;

The article mainly introduces the problem of how to use the grinding mill in winter. The analysis of this problem is mainly carried out from three aspects. The above descriptions of these three aspects are more detailed because the temperature in winter Low, the working process of the equipment will be greatly affected, so some protective measures need to be taken to help the equipment work better.