New progressive cavity pump KTE The KIBER KTE are progressive cavity pumps with a hopper and a feeding screw, so they are used for viscous products, masses, pastes and liquids with solids in suspension.To get more news about progressive cavity pump, you can visit brysonpump.com official website. Their main application is for transferring whole or destemmed grapes and the compact design allows to install them right under the destemming machine. The feeding screws have a specific design, adapted to every pump size, in order to deliver a gentle passage of solids, according to flow.The hoppers have a safety grid, a drainage and a minimum level resistive sensor to stop the pump in the event there is not product inside, and therefore, to avoid the running on dry, that could damage the rubber of the stator and the mechanical seal. The pumps are supplied on a stainless steel trolley with wheels with brake. Also, an ergonomic handle prepared to mount an electrical panel is included. Tailor-made electrical panels can be mounted, to cater for your individual needs. The drive consists of a worm gearbox with flange, coupled to a standard three-phase electric motor according to IEC. At World Biogas Expo, Vogelsang will also be advising on the processing of structurally rich biomass by means of mechanical disintegration. Long-fiber and coarse input materials such as straw, grass or manure can be processed with the DisRuptor from Vogelsang. This reduces the amount of internal energy required and at the same time increases the gas yield. Vogelsang will also be providing information on other systems from the pumping and shredding technology segments.