Elastic Sleeve Pin Coupling

The elastic pin coupling places pins made of several non-metallic elastic materials in the flange hole of the two half couplings and the two half couplings are connected through the pins. The coupling has simple structure and is easy to manufacture. Get more news about Elastic Sleeve Pin Coupling Factory,you can vist our website!
The elastic pin coupling places pins made of several non-metallic elastic materials in the flange hole of the two half couplings and the two half couplings are connected through the pins. The coupling has simple structure and is easy to manufacture. It is convenient to assemble, disassemble and replace the elastic elements without moving the two couplings.

Are you going to wholesale customized elastic sleeve pin coupling from one of the leading Coupling manufacturers and suppliers? Then you can immediately make contact with our factory.
Introduction of elastic sleeve pin coupling for pump:

① Elastic sleeve for pumpPin couplingA rubber ring is sleeved on the pin, which has elasticity and the ability to compensate axis displacement, but when the relative angular displacement is large, it is easy to wear.

②Simple structure, convenient installation, easy replacement, small size, light weight, large transmission torque, widely used in various rotary pumps;

③The allowable relative radial displacement is 0.14-0.2mm; the allowable relative angular displacement is 0 degrees 40 minutes;

④ The additional radial load caused by the relative displacement of the two shaft axes is (0.1-0.3)P;

⑤The standard of the water pump industry is Bll01, its allowable torque is 8316N·m, and the shaft diameter is 200mm.