Stainless Steel Wire mesh Standards from freeamfva's blog
Stainless Steel Wire mesh Standards
AISI and SUS are the commonly used marks in description of stainless steel wire in China. AISI refers to US Steel Association marks of stainless steel while SUS is used in front of Japan marks indicating it is for special purpose. What is the difference? What are the mostly used stainless steel grades in the world? What is the Chinese standard about stainless steel wire as materials used in weaving wire mesh?To get more news about stainless steel filter wire mesh, you can visit resenwiremesh.com official website.
1, Stainless Steel International Standard System
Stainless steel wire has two main standard systems:
Germany - France - Russia System: This system is characterized by its identification of the components in the trademark. China Stainless Steel Trademark adopted the method of the former Soviet Union, the countries belonging to this system also include Italy, Spain, Poland, Romania, the European Union and India.
United States - Britain - Japan System: Its characteristics are concise, clear, easy to remember. From the mark, we can know the organizational structure of the steel. Countries and regions adopting this system include Canada, Brazil, Australia, South Africa, South Korea and China Taiwan Province.
Marks for Stainless Steel Grade of China
1Cr18Ni9: An average content of 9 percent nickel, average 18 percent of chromium, carbon content * 10 percent (0.1 percent).
1.The first figure before the grade mark is ten times the percentage of carbon content.
2. The figure behind the key element indicates the percentage of this element. If the element content is less than 1.5 percent, then the figure is not written, if more than 1.5 while less than 2.5 percent, then the figure 2 is written after the element.
3. The trace elements such as Ti, Nb, Al, N, and other trace elements should be written in the steel grades.
4. The character Y should be added in front of the mark for free cutting steel.
5. The trademark followed by "L" indicates cold drawing, plus "Q" indicates light drawing, plus "R" indicates the soft state.
AISI and SUS are the commonly used marks in description of stainless steel wire in China. AISI refers to US Steel Association marks of stainless steel while SUS is used in front of Japan marks indicating it is for special purpose. What is the difference? What are the mostly used stainless steel grades in the world? What is the Chinese standard about stainless steel wire as materials used in weaving wire mesh?To get more news about stainless steel filter wire mesh, you can visit resenwiremesh.com official website.
1, Stainless Steel International Standard System
Stainless steel wire has two main standard systems:
Germany - France - Russia System: This system is characterized by its identification of the components in the trademark. China Stainless Steel Trademark adopted the method of the former Soviet Union, the countries belonging to this system also include Italy, Spain, Poland, Romania, the European Union and India.
United States - Britain - Japan System: Its characteristics are concise, clear, easy to remember. From the mark, we can know the organizational structure of the steel. Countries and regions adopting this system include Canada, Brazil, Australia, South Africa, South Korea and China Taiwan Province.
Marks for Stainless Steel Grade of China
1Cr18Ni9: An average content of 9 percent nickel, average 18 percent of chromium, carbon content * 10 percent (0.1 percent).
1.The first figure before the grade mark is ten times the percentage of carbon content.
2. The figure behind the key element indicates the percentage of this element. If the element content is less than 1.5 percent, then the figure is not written, if more than 1.5 while less than 2.5 percent, then the figure 2 is written after the element.
3. The trace elements such as Ti, Nb, Al, N, and other trace elements should be written in the steel grades.
4. The character Y should be added in front of the mark for free cutting steel.
5. The trademark followed by "L" indicates cold drawing, plus "Q" indicates light drawing, plus "R" indicates the soft state.
Post
| By | freeamfva |
| Added | Aug 22 '21 |
Rate
Archives
- All
- November 2024
- October 2024
- September 2024
- August 2024
- July 2024
- June 2024
- May 2024
- April 2024
- March 2024
- February 2024
- January 2024
- December 2023
- November 2023
- October 2023
- September 2023
- August 2023
- July 2023
- June 2023
- May 2023
- April 2023
- March 2023
- February 2023
- January 2023
- December 2022
- November 2022
- October 2022
- September 2022
- August 2022
- July 2022
- June 2022
- May 2022
- April 2022
- March 2022
- February 2022
- January 2022
- December 2021
- November 2021
- October 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
The Wall