en

SUMMARIZATION OF PLUG VALVE from freeamfva's blog

SUMMARIZATION OF PLUG VALVE

Plug valve is a circumrotating valve with its closure part as a plug, which turns 90 with its through bore connecting to or apart from the same of the body to realize opening or closing. The figure of the valve plug can be made as column or taper.Get more news about pressure balance plug valve,you can vist our website!
Of the column plug valve, the flow bore gets rectangle in general, and that of the taper type plug valve, the flow bore is of trapezium.The figures mentioned have made the structure of plug valves legerity, however, certain loss is at the same time generated.
The plug valve is mostly suitable for cutting off, turning on and distributing the flow medium. Sometime it can also be used for throttling based upon suitable medium and the erosion resistance property of the sealing surfaces. Due to the friction action between the sealing surfaces of the plug valve,whereas contact with flow medium can be completely avoided as the valve is fully opened.In this respect, the plug valve can also be used for the medium with suspend grains.
One of the important characteristics of the plug valve is that it is prone to fitting multi-center structure, so that one single plug valve can be designed with two, three, and even four different flow bores. In this way, the design of the pipeline system can be simplified, and both valve quantity and piping fittings can be reduced. The plug valves are widely used in the applications of oil field exploitation, transportation, and refinery facility, while being extensively used for such general industries as petrochemical, chemistry,gas, nature gas, liquefied oil gas, and warming & traffics.
Lined plug valves without lubricant are used for applications of petrochemical and chemistry industries, especially being used for the medium that is not allowed to be with lubricants.
The face-to-face dimensions of these valves are designed according to Britain and American standards to ensure inter-replacing of valves among different standards. The plug bore of these valves are of reduced bore area, however, the center line position of the plug valves does not change, which generates in the valve body a Venturi action to increase the loss of flow velocity with big percent. The result generated by this action is a corresponding low pressure drop. In this respect,the plug valves can be used in general pipelines, especially used for big sized pipelines to reduce application cost


The Wall

No comments
You need to sign in to comment