The grinding equipment such as vertical roller mill, high-pressure suspension roller mill, high-pressure micro-powder mill, superfine fine powder mill is a miller expert with many years of experience and advanced skills in many countries. The customer's response and the new demands of the current market are being improved and refined on the basis of the original grinding equipment. The milling equipment can be excellently used in the processing of barite, and it is not finely ground for grinding, satisfying the different needs of various industries.

1. Under the action of high-pressure spring, coupled with the structure of vertical squirrel cage, the product pass rate is greatly improved, and there is no significant granularity.

2. self-contained system, less production links, materials below 25mm can be directly processed into the machine.

With the development of the age, the demand for barite has also increased, and its use has become more widespread. In the crushing and grinding process of barite, different types of crushers are used to carry out preliminary crushing to different particle sizes, which facilitates the grinding process with a mill. Barite can be effectively utilized in different categories after it has been milled to a different size by a different type of mill.

Firstly, professor’s recommend, which is the most effective way. The most effective way is to ask advice from professor. Because the professor is specialized in this field, they are quite familiar with the market conditions and they have basic awareness for the manufacturer’s capacity. Generally speaking, listen to the professor’s advice to buy ultrafine mill is very helpful.

Secondly, to compare the manufacturers, that is the most reasonable way. This can help customers to make preliminary decision. However if you want to buy a cheap ultrafine mill from the fundamental our customers should think by themselves from the manufacturers, equipment qaulity and comprehensive service, then compare them from each other according to the practical conditions so that we can make the most reasonable judge.

Last but not least, to search in the internet, that is most direct way. Nowadays, the internet is developing increasing quickly, therefore buying a ultrafine mill from the internet is the most direct way. It is also the most common way to use for most of the people.

With the development of science and technology, rare earth science and technology will continue to expand and extend, as a rare earth Raymond mill machine production line manufacturer, with the development of rare earth science and technology, SBM will also be based on the market, to achieve innovation and upgrading, to create greater profits.

SBM, specializing in grinding machine R&D and manufacturing, rare earth Raymond grinding mill production line use new technology to create new Raymond Mill equipment, the market value is high. Covering a number of patented technologies, production capacity is 30-40% higher than R-type machine, unit energy savings more than 40%, is a strong milling equipment to create a considerable market profits, enhance the competitiveness of the enterprise.

Maximum feed size: 30mm

Grinding ring diameter: 1000-1700mm

Machine power: 555-1732KW

Production capacity: 3-90t/h

Finished grain size: 0.038-0.18mm

ZENITH: manufacturer of ultrafine vertical mill, is a high-tech enterprise specializing in producing powder equipment. After years of development and accumulation, ZENITH has rich experience in mechanical processing and manufacturing, and has the development vision of keeping pace with the times. 

By absorbing and introducing advanced technology, ZENITH series products are continuously strengthened. ultrafine vertical mill is advanced equipment applied in the field of phosphorus ore, with high efficiency, low energy consumption, energy saving and environmental protection, and scientific price formulation, reasonable selection scheme, is an ideal equipment for phosphate ore grinding mill.

In the ultrafine mill machine, there are two lubrication methods: rare lubrication and grease lubrication. The thin oil lubrication inside the reducer below the ultrafine mill can remove the dust impurities and heat inside the bearing through the thin oil, protect the bearing from dust pollution, and protect the bearing from excessive heat damage. The separator on the upper part of the ultrafine mill is greased. The grease lubrication can reduce the friction between the bearings and reduce the chance of bearing damage.

Wear parts are a major expense for ultrafine mills and are essential for making powder products. The material is ground in the gap between the grinding disc and the grinding sleeve, causing the wear of the two kinds of wear parts. If not replaced in time, the parts under the grinding roller and the grinding disc will also be worn, which will lead to a sharp increase in operating costs. Therefore, it is necessary to replace the wear parts in time. In addition, the distance between the grinding roller and the grinding disc should be adjusted in time with the wear of the wear parts to ensure the normal operation.

In terms of the fineness of the output powder, the fineness of the finished product after grinding by the vertical mill is more than 80-400 mesh, and even if the conditions permit, some materials can reach 800. The purpose is that it can be directly used in the industry without further processing, so the vertical roller mill grinds into 200 mesh limestone, which is technically no problem.

In terms of investment budget, unlike other milling equipment, the vertical roller mill has a compact structure and a complete set of components. It can be self-contained into a production system, thus reducing investment costs, so compared to other milling powders. Equipment, the use of vertical roller mill to grind limestone materials is suitable.

When you have raw materials, you should investigate the vertical roller mill. Most of the raw materials need to be tested on the basis of knowing the nature of the raw materials. If we do this, we can perfectly choose the corresponding vertical roller mill according to its hardness, moisture and so on.

At the same time, you should investigate the lower market. Generally speaking, the more fine the raw materials be processed the higher profits for vertical roller mill. And the equipment cost, energy consumption will be higher. According to the demand of the market, we investigate which kind of raw materials will be more widely applied and more popular. Thus we will make our vertical roller mill create more profits.

In the bottom of the ultrafine mill, the wind channel has holes, which besides the margin, outside holes channel there welds a discharge tube with small caps. 

The hardness of these raw materials are higher than normal materials, difficult to grind and crush, which will also influence the output of ultrafine mill and speed up the parts wearing. However if install the automatic deslagging system, it will effectively abolish these impurities and increase the capacity and decrease the wearing.

When the ultrafine mill is running, some materials hard to grind will enter into discharge tube through relieving tool. When the discharge tube is stuck of raw materials, the outside caps will automatically open and discharge the impurities without losing micro powder.

The improvement on ultrafine mill equipment is developed according to the users feedback and manufacturers technique R&D, deeply digging into the customers to gain practical experience. Only continuously innovate and try out can we produce high quality powder grinding equipment.

vertical roller mill, a kind of grinding machine, in fact, is extensively used in decorative materials, such as putty powder decoration materials .It is the ideal milling equipment for smear powdery objects most. Powder processing for a variety of non flammable and explosive material decoration material. It is very widespread use of powder putty putty powder . A substrate for wall repairing and leveling, for the next step (decorative paint wallpaper) and lay a good foundation.

vertical roller mill in grinding material, the metal surface and the environment and no material changes due to the damage of the medium, the grinding roller surface of metal without current or high temperature oxidation corrosion in the grinding process, it is good to retain the physical and chemical nature of the material itself.

If you want to keep vertical roller mill high work efficiency, you should pay scientific maintain measures to Raymond mill. In different season, the ways of maintain the machines are also different. So what about the skills to maintain vertical roller mill when fall comes?

First, the user must often be thoroughly to cleaned vertical roller mill, including the body, grinding ring, roller, electric motors, belts, gears and other connections, its purpose is to do a body check mill, found the site for vulnerabilities.

Since many users mill equipment are installed in the field, which often subjected to high temperatures, such as exposure, rain erosion, resulting in a milling machine parts accelerate aging, so pay special attention to equipment Sling place up paint, avoid equipment occurrence of rust.

Also autumn rains more than summer. We should pay special attention to the Raymond mill power cord, good waterproofing devices protect electrical equipment.