Once you decide where to mount the LCD TV, you might consider disguising the audio and video cables and power cord to make things look neat and tidy. Some wall mounts have peripheral cable boxes that can be placed below them  tv wall mount installation. Most people prefer running the wires along the wall. There are line covers with strong adhesive that can stick the wires to the wall. You can color the line covers with a color similar to the wall to make the covers blend with the wall. If the wall area provided in the package is specific to the TV model, you might have to the television area with another one designed for the new TV. Try using the wide-spread mount so you don't have to concern yourself with changing TV wall brackets every time you change Television.

When building the television area, attach a side to side support to a wall angle element using two products, four lock washing machines, and two crazy. A lock cleaner should be next to each bolt head and each fanatic, to ensure the products are secured and will not weaken. Fasten the crazy using the Allen wrench on the hole in the head of the bolt and the open-end wrench on the fanatic. Do this process for all corners, and make sure both wall angle themes are driven the same direction, with the slot machine in the hanging hole to the bottom. Be sure there is nothing delicate or risky below the area where you will place the television wall area. No matter how careful you are, accidents can happen and the TV might fall off the beaten track brackets and damage anything below it.

When constructing a house, the architect sets the studs a standard distance apart from each other. Once you locate a stud, it may be easy finding the location of the other studs. Use a stud finder to facilitate the work. Use a level to ensure the TV area is level and straight. There are different TV wall brackets and you should find one that fits the ranges of your studs. Securing the television area to the studs ensures it is firm and will not give way to the weight of the TV. Mark the spot of the eight holes you will be using for the lag products. Use the electric soccer drills speed to soccer drills speed small holes in the marked positions. The drilled holes should be smaller than the size of the products. All eight holes should be firmly embedded in the center of the studs. Position the television wall area over the holes, with its flat side up against the wall, and attach the television brackets to the wall.

Attaching the LCD TV area to a concrete or packet wall is a similar process. You will use bare concrete anchors instead of lag products when attaching the television wall brackets to the bare concrete wall. Avoid holes that are better than two ins from a mortar joint. If the holes are close to a joint, the anchors may become loose. Insert the anchors in the holes and set them with a concrete single point tool and hammer. Be sure everything is firmly screwed in and firmly in place. Test your installation by pulling on the brackets carefully and check if the connections feel loose.

Get some visitors to help offer the LCD TV in place while you attach it to the TV wall mount. A flat panel screen can be very heavy depending on its size. The television wall mount may have interest holes and products to modify the angle of the TV. Be sure the holes and products on both sides of the TV mount are matched on the same angle; otherwise the television will be uneven. Once the angle is fixed, fasten all the products and screws that ought to be fixed and immovable. Make sure all products and screws are tight every step of the way.