The Cleaning Effect Of Ultrafine Vertical Mill from 's blog
For the back-flushing bag-type ultrafine vertical mill, after the bag room is cleaned, the pressure loss can only be reduced to 20-80% of that before cleaning because there is still a layer of adhering dust. when the cleaning is not complete, the adhesion layer is speckled. if the work is continued, the pressure loss will rise sharply. this shows that the pressure loss of the filter bag has decreased, which does not mean that the dust is completely cleaned.
For multi-chamber bag-type ultrafine vertical mills, the method of off-line cleaning by separate chambers is often used. at this time, although the actual total filtration area of the ultrafine vertical mill is reduced, the pressure loss will increase slightly. when the cleaning is finished and the work is resumed, because the impedance of the bag chamber for cleaning has dropped and the air volume passing through it has increased, the total air volume of the reverse-blow bag ultrafine vertical mill will increase after cleaning, compared with before cleaning, and the pressure loss will increase. will drop.
The dust-removing effect of the back-flushing bag-type ultrafine vertical mill is relatively weak, so the filter cloth is generally recommended to use a lighter woven cloth [300-450g/㎡], which is rich in softness and has a small size change.
For multi-chamber bag-type ultrafine vertical mills, the method of off-line cleaning by separate chambers is often used. at this time, although the actual total filtration area of the ultrafine vertical mill is reduced, the pressure loss will increase slightly. when the cleaning is finished and the work is resumed, because the impedance of the bag chamber for cleaning has dropped and the air volume passing through it has increased, the total air volume of the reverse-blow bag ultrafine vertical mill will increase after cleaning, compared with before cleaning, and the pressure loss will increase. will drop.
The dust-removing effect of the back-flushing bag-type ultrafine vertical mill is relatively weak, so the filter cloth is generally recommended to use a lighter woven cloth [300-450g/㎡], which is rich in softness and has a small size change.
Post
Rate
Archives
- All
- January 2023
- November 2022
- September 2022
- August 2022
- July 2022
- May 2022
- October 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
- April 2021
- March 2021
- January 2021
- December 2020
- November 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- January 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- July 2018
- June 2018
- May 2018
- April 2018
The Wall