Vertical Mill's Starting Capacitors from 's blog
First of all, the manufacturer’s solution to the problem of equipment components is to check whether the power socket, power cord, etc. are broken or there is no oxygen falling off. If these problems occur, they must be resolved in time, otherwise the power supply can be used and test machine work can be performed;
The second is the problem that the motor does not rotate after the vertical mill is powered on. At this time, turn the wheel lightly to observe the master's rotation. If it rotates, it means that one of the vertical mill's starting capacitors has failed;
Once again, the vertical mill rotates after applying pressure and will emit a faint current noise, indicating that the starting capacitor is leaking slightly. If the current is loud and the motor cannot be started, it means that the starting capacitor is short-circuited;
The second is the problem that the motor does not rotate after the vertical mill is powered on. At this time, turn the wheel lightly to observe the master's rotation. If it rotates, it means that one of the vertical mill's starting capacitors has failed;
Once again, the vertical mill rotates after applying pressure and will emit a faint current noise, indicating that the starting capacitor is leaking slightly. If the current is loud and the motor cannot be started, it means that the starting capacitor is short-circuited;
Post
Rate
Archives
- All
- January 2023
- November 2022
- September 2022
- August 2022
- July 2022
- May 2022
- October 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
- April 2021
- March 2021
- January 2021
- December 2020
- November 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- January 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- July 2018
- June 2018
- May 2018
- April 2018
The Wall