Body armor is making mass shootings more deadly

The mass shootings that occurred this month in Uvalde, Texas and Buffalo, New York had several things in common. The shooters were both 18 years old, both used semi-automatic weapons, and both were wearing tactical gear.To get more news about bulletproof zone customer service, you can visit bulletproofboxs.com official website.

Salvador Ramos, the attacker in Uvalde, muscled his way past a school police officer and into an elementary school wearing a “tactical vest carrier,” Texas police lieutenant Christopher Olivarez told reporters. On May 15, Payton S. Gendron killed 13 people at a Buffalo supermarket while wearing body armor, tactical gear, and a helmet. Ramos took 21 lives, 19 of them young children. Gendron, who targeted Black people and was shot at and hit by a retired police officer on the scene, killed 13. In a 180-page manifesto, he specifically cited procuring body armor to protect himself from armed security.
Military-style body armor is readily available in the US, and nonprofit The Violence Project has found that in the past decade it’s increasingly favored by perpetrators of mass shootings. While the debate on gun control is well trodden, dialogue around body armor is harder to find, and regulations are exceedingly scarce.

Details have yet to emerge on the exact gear worn by the Uvalde and Buffalo shooters, but all kinds of tactical equipment are easily available online. Bullet-proof vests typically consist of plate carriers made of steel, ceramic, or Kevlar, a kind of synthetic fiber—although bullet-proof is a bit of a misnomer. Brands and retailers warn that their products should be considered bullet-resistant and that any gear always carries a risk. In the US, protection is graded on a six-level scale, from being able to withstand stabbings to multiple ballistic hits.

Although New York is currently considering a bill that would prohibit owning a body vest, there are few restrictions like it elsewhere in the US. The state of Connecticut restricts face-to-face sales unless the buyer is active police or military, but again, kits are easy to find online. It’s also illegal under federal law to own body armor with a prior felony conviction, but since background checks are not required to buy tactical gear, that particular legislation is easily sidestepped.

Some of the more popular manufacturers of protective vests include Hesco and RMA, with styles starting at a few hundred dollars. High-end gear can run up into the thousands.

Bulletproof Vest For Kids

With everything going on in our world today, it comes as no surprise that we are fielding more and more inquiries from parents looking for body armor for their children. It's truly sad to think that of all the things parents have to worry about today, buying their child a bulletproof vest is now on the list. To get more news about hard armor panels, you can visit bulletproofboxs.com official website.

So to help bring some clarity this most troubling issue facing parents today, I've compiled a list of the most commonly asked questions by parents who are shopping for body armor for their kids. I'll review sizing, pricing and types of body armor to help give you a better idea of what to look for when purchasing a bulletproof vest for your child. But first, let's get some clarity on why using the term "bulletproof" isn't actually correct.

Bulletproof suggests that a bullet can never pass through the vest; completely impenetrable. Just like something that claims to be waterproof. When you say something is "waterproof" you are declaring that water will NEVER get inside.

The reality is, no vest manufacturer can ever truly claim that their product is 100% bulletproof. Eventually, with enough rounds, material will break down and a bullet can and will pass through.

So when shopping for a ballistic vest, know that you're truly looking at a bullet "resistant" vest. A product that will provide you with a certain degree of protection against certain caliber bullets up to a certain point.

What size body armor should you buy for my kids?
If you're looking for a soft body armor vest for your child (which is rated to stop bullets from a handgun) you are most likely going to need to purchase an Extra Small or Small vest.

If you are looking for protection against rifle rounds such as .223 or 5.56 you are going to need to upgrade to hard body armor plates. These plates are generally thicker, heavier, and as their name suggests, harder than soft armor panels and vests. Children and smaller framed adults will generally need 8"x10" plates.

Be advised that hard armor plates will require the purchase of a plate carrier which allows the plates to be worn front and back. When purchasing a plate carrier, be sure to confirm that the carrier is designed to carry 8"x10" plates.
The fact that so many parents requested I write this blog is troubling in and of itself. It is truly a sad sign of the times and the world we are living in today. However, many parents are lost and scared when it comes to purchasing body armor of any kind for their child. They want to know they are spending their money on the right product and are making the right decision.

How does a bulletproof vest absorb the impact of bullets?

As long as there is a spear, there is a shield. Humans developed bullets hundreds of years ago. With the increasing harm of bullets to the human body, people began to study the armor to defend against bullets. Actually, bulletproof vests can be traced back thousands of years ago. After all, before there are bullets, human beings also need to resist injury from knives, guns, and rolling stones. During World War II, bulletproof vests gradually began to emerge, but at that time, they were basically head-to-head, much like the armor made of all steel in ancient times. When the penetrating power of bullets became stronger and stronger, the protective power was almost like paper. Later, the continuous improvement of materials revolves around a principle, that is, the initial point impact ability of bullets can be quickly absorbed into bulletproof vests. However, the reality is always unsatisfactory. Even if you wear bullet-proof vests of excellent quality, the difference in penetration and the distance between bullets will still cause pain like a stone or a heavy shot.To get more news about hard bulletproof vest, you can visit bulletproofboxs.com official website.

Of course, wearing body armor can save your life to a great extent, but it will also cause different degrees of injury. Even if you survive being hit by a bullet, the painful recovery period after being hit by a bullet is also very long. In severe cases, even if your body is healed, it may still cause stress trauma disorder. There is no treatment in front of this disease, and perhaps time will heal all wounds because it has a typical symptom, that is, the never-ending past reappears (commonly known as a flashback). In this case, it’s hard to get rid of it. All feelings after being shot will affect memory, so fear, grief, and despair will follow.

Lightweight body armor
At present, the most widely used light body armor is the Kevlar layer, which is an aramid fiber product developed by DuPont Company in the United States. The original name of the material is poly (p-phenylene terephthalamide), and it is a high-strength synthetic aramid fiber developed in the 1960s. Body armor is generally composed of 20-50 layers of Kevlar. The speed of modern pistol bullets is generally about 400 cm per second. When the bullet comes to the first layer of Kevlar, the energy of the bullet is at its highest at this time, so that it is effortless to break through the first layer, the same is true for the second layer, and the same is true for the third layer. However, in this process, the energy of the bullet will plummet with the rupture of Kevlar, until the bullet reaches the bottom of a certain layer and is slowed down. At this time, the energy of the bullet is not enough to penetrate the last Kevlar layer. Is there a feeling of life hanging by a thread?
This kind of bulletproof vest is generally known as a soft bulletproof vest. The bullet speed of a rifle with a larger caliber is about twice as fast as that of a pistol, which can reach an astonishing 800 meters per second. At this time, the traditional Kevlar layer seems to be illusory at this speed. What should we do? The only way to slow down the bullet again is to add a steel plate on top of the Kevlar layer, which can keep the bullet out of the door. The Kevlar layer below is finished before it even starts to work. It seems very effective after adding a steel plate, but it will cause more serious blunt injury. On the surface, it seems that there is no harm, but the internal organs have been shaken to pieces. At the moment, it is like a high-speed steel plate hitting the human body. Because the bullet hits the steel plate, it releases strong kinetic energy, and the Kevlar layer does not have the ability to eliminate this part of kinetic energy.

New bulletproof gear will allow firefighters to get into 'wound zones' faster

Often times firefighters arrive at dangerous situations before police officers. On Tuesday morning, they received body armor that will help protect their lives and increase their chances of saving a life.To get more news about hard armor panels, you can visit bulletproofboxs.com official website.

Every day, Houston firefighters put their lives on the line to protect our community. “Sometimes we are going into scenes that are not completely stabilized,” said Executive Assistant Fire Chief Richard Mann.

Houston firefighters received Level IIIA body armor and ballistic helmets.

“Unfortunately it’s a sign of the times we live in," Mann said. "This ballistic protection will allow us to get into those scenes, those wound zones, a little quicker to afford us some protection before the scene is stabilized to get in there and stop the dying."

The faster firefighters respond, the better their chances of saving a life. Mann said the new vests and helmets would have helped in previous active shooter situations like the drug raid on Harding Street and the Santa Fe school shooting.EMS and fire service, we need to access the victims quicker. A lot of the victims in those incidents were salvageable; they were people we could have saved if we got to them a little bit quicker,” said Mann.

This new layer of protection will also enable firefighters to train alongside police officers so they can "join together as really a unified public safety response when these incidents happen,” said Mann.

Each vest weighs about 25 pounds. The cost was split between state/local and federal taxpayer dollars.

“The risk we face now requires we have this level of protection,” said Mann, adding it will be around mid-My before firefighters begin using the vests when the situation calls for it.