First of all, tear a single sheet of paper towel in half. Then fold the sheet in half several times until it is about 1/2 inch.

Kodak Printer Support Phone Number

Then, put the print head on top of the paper towel and then put a few drops of distilled water for at least 15 minutes. This will soften the ink on the printhead.

Next, move the printhead assembly back to its resting position. Then you will probably notice that the paper towel now has one big black blob of ink on it. (There is so much excess ink on the print head that all the colors are mixing to make black).

If you can’t properly see individual colors, then dampen another spot on the paper towel and move the print head back over the newly dampened spot on the paper towel. Then continue repeating this until you see all the individual colors.

Solution 2:- Perform Self-cleaning Method to fix Kodak Printheads Problems

Method 1:- It is advice that you should perform the suggested methods of self-cleaning the Kodak printheads in the order they are listed below.

Step 1:- Clean the print head if there is a horizontal line or a blank space in the text or graphics on printed pages. Depending on the problem color, select to clean Black only, three colors at a time (Yellow/Cyan/Magenta), or all four colors at once.

Step 2:- Then cleaning the print head consumes ink.

Step 3:-And after then cleaning too often uses ink unnecessarily.

Method 2:-Run Your Printer’s Self-Cleaning Cycle

Kodak printers feature a self-cleaning cycle designed to remove trapped air and dried ink from printhead nozzles. It works by pulling ink from the cartridge through the nozzles with enough force to clear the blockage, though the wipers can sometimes smear excess ink over the printhead. After numerous cleanings, this ink can build up and again block the nozzles, so do not run more than three consecutive cleaning cycles. Initiating a Kodak inkjet printer’s cleaning cycle is relatively simple, as you simply need to print a test page first to determine in which of the three color or black nozzles the blockage lies. After locating the problem nozzle, you can run the “Cleaning” option from either the “Ink” or “Menu” button and choose that nozzle. After the cleaning cycle finishes, you can print another test page, and then run the cycle up to two more times if the nozzle remains blocked.

If the cleaning cycle does not solve the problem, then you can proceed with the next solution.

Solution 3:- Perform Manually Method to Clean the Print head by Wipe It

You should need to manually wipe the Kodak Printhead to solve the issues. Attempt manually method to clean the printhead by wiping it with a paper towel. Start with an additional cleaning cycle, but remember to disconnect the power source as soon as the cycle begins. This moves the printhead from its parked position and allows you to slide it freely along the paper roller. From now, move the printhead off to one side, fold up a paper towel so that it is long and narrow, moisten it with printhead cleaning solution, place it on the paper roller, and secure it with tape. Next, move the printhead over the paper towel and let it sit there for 15-16 minutes. You may have to repeat this process with clean paper towels until all of the individual colors come out in addition to black. Before you plug your printer back in and print another page, however, make sure that you moved the print head all the way to the right to return it to the parked position.

In this manner, you can solve the issue.

But in case, if you face difficulties in performing the above steps, then you can get comprehensive guidance with the help of the Kodak Tech Support team.

Get Immediate Help Now Dial Kodak Customer Care Number

With the help of our amazing Kodak Customer Support team, we can help you get instant elimination against the Kodak Printer problems. Call at Kodak Printer Customer Support Phone Number, which is a toll-free number and works 24×7 days to your online help. We are renowned Kodak Customer support service provider and deliver the excellent solutions & support to users in enlightening/to resolve the Kodak printer associated technical issues or errors. It assures through help from our well-qualified and certified team of Kodak Support experts, users will grab the enhanced, easy and swift solutions to the Brother Printer queries within a less time. Hence, call us now to get more information & support.

Xerox Printer Support Phone Number

https://www.customersupportcare.com/xerox-printer-support.html

https://www.customersupportcare.com/kodak-printer-support.html