The Debugging Of The Dolomite Powder Machine from 's blog
The inspection work before the debugging of the dolomite powder machine is required to be meticulous and keep the equipment in good condition. The details are as follows: the sector block and bearing bush of the lower bearing seat should be aligned with the center line; the large gear and the pinion should be aligned according to the instructions.
The sector block of the lower bearing seat, the bottom plate of the pinion, the bottom frame of the main gear and the bottom frame of the motor are completely grouted, and the grouting strength meets the design strength requirements.
All anchor bolts, connecting bolts and main gear pressing bolts should be tightened. The fixing bolts of the large gear should be tightened according to the specified torque.
The bearing bush should be installed on the fan-shaped block of the bearing seat according to the rotation direction of the dolomite powder machine; the bearing bush should be corrected according to the axial guide ring; the bearing seat seal is installed correctly, and the joint point is sealed with sealant.
The sector block of the lower bearing seat, the bottom plate of the pinion, the bottom frame of the main gear and the bottom frame of the motor are completely grouted, and the grouting strength meets the design strength requirements.
All anchor bolts, connecting bolts and main gear pressing bolts should be tightened. The fixing bolts of the large gear should be tightened according to the specified torque.
The bearing bush should be installed on the fan-shaped block of the bearing seat according to the rotation direction of the dolomite powder machine; the bearing bush should be corrected according to the axial guide ring; the bearing seat seal is installed correctly, and the joint point is sealed with sealant.
Post
Rate
Archives
- All
- January 2023
- November 2022
- September 2022
- August 2022
- July 2022
- May 2022
- October 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
- April 2021
- March 2021
- January 2021
- December 2020
- November 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- January 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- July 2018
- June 2018
- May 2018
- April 2018
The Wall