Wastewater treatment is very essential to any modern civilization given that all water is essentially recycled [url=http://www.cheapjerseysbears.com/tarik-cohen-jersey/]Wholesale Tarik Cohen Jersey[/url] , be it from a toilet or a bathtub drain. We all see the huge water towers alongside roads and highways, but few people really know how the treatment process works. We don't really think about it because no one wants to dwell on the fact that their drinking water may have seen the inside of a toilet bowl. The following article will explain step by step how sewage is able to go from toilet water to drinkable tap water, and used all over again.

Pre-Treatment

This is the process by which all obvious particles are removed from the water. First, a large screen or rake is used to remove any large floating objects, such as sticks or plastic. Next [url=http://www.cheapjerseysbears.com/jordan-howard-jersey/]Wholesale Jordan Howard Jersey[/url] , a settling chamber removes the smaller particles. It is basically just a tank where the water sits long enough to let all the particles settle to the bottom and allow the liquid to be removed. The final step in this process is to remove fat and grease with a large skimmer, since these substances will always float to the surface.

Primary Treatment

This is very similar to the previous step, just more thorough. Water is passed through various chambers to allow any remaining sludge to settle, and more grease and fat is skimmed off as it goes along. Mechanical scrapers collect the waste and move it to another facility, where it too can be recycled and the grease used to make soap in a process called saponification.

Secondary Treatment

In this stage [url=http://www.cheapjerseysbears.com/mitchell-trubisky-jersey/]Wholesale Mitchell Trubisky Jersey[/url] , the focus is on degrading any biological products, such as human waste, soap, and detergent. This normally is done by introducing bacteria into the water which will degrade some of the material, and make the rest clump together in masses known as floc. This is done in one of two ways. The bacteria can be introduced directly into the sewage and mixed in [url=http://www.cheapjerseysbears.com/roquan-smith-jersey/]Wholesale Roquan Smith Jersey[/url] , or the sewage can be continually trickled over a filter the bacteria is growing on. The former is more space efficient but less capable of handling heavily contaminated loads. After this process is completed the resulting mixture goes to another settling tank to once again allow the chunks to settle to the bottom and be removed.

Tertiary Treatment

This is the final cleansing stage. During this part, the water is run through sand to remove the last remnants of suspended material, and over a carbon filter to remove remaining toxins. Some plants also use a process called lagooning, in which man made lagoons provide a final area for sediment to settle, and for further microbes to remove any remaining harmful particles. After everything is removed [url=http://www.cheapjerseysbears.com/khalil-mack-jersey/]Wholesale Khalil Mack Jersey[/url] , the final step is to disinfect it. The most common way is by using chlorine, but other methods include ultraviolet light and generated ozone.

Of course, after all this wastewater treatment is completed, it still does not go right to your tap. This water is clean, and is released back into the environment [url=http://www.cheapjerseysbears.com/riley-ridley-jersey/]Wholesale Riley Ridley Jersey[/url] , but plants that create drinking water have even further steps once they take the water back from the environment. Writing for the internet requires that you create a large number of articles in order to get yourself noticed. You may think, "who has the time?" Well, you do if you follow a few of the simple rules I have outlined here.

1. Divide and conquer. Chances are you have a few excellent articles in your portfolio which, by themselves, are worthy reads. Still [url=http://www.cheapjerseysbears.com/david-montgomery-jersey/]Wholesale David Montgomery Jersey[/url] , take a second look at these articles as they may have much more "to speak" to readers than what you currently have to say.

Exactly what am saying to you? Here is an example: One of my favorite and most read articles discusses the premium topic of business aviation. The article describes five leading private jet aircraft and compares and contrasts these particular makes and models. My readers say that the article is very informative and engaging, but I know that there are another five articles contained within that one article. How so? Each aircraft can and should be a story in and of itself.

I plan on taking the original article and dividing out the various aircraft and writing stories on each one. Where I previously had one solid article, of just over 1200 words, I will have an additional five articles of approximately 500-600 words each. Basically, I am "fleshing out" some of the verbiage previously written by expounding on several key points. In essence [url=http://www.cheapjerseysbears.com/akiem-hicks-jersey/]Wholesale Akiem Hicks Jersey[/url] , the one article will be divided up to become six articles in total.

2. PointCounterpoint. In the earlier days of the news show, 60 Minutes, the show featured a segment called PointCounterpoint whereby two members of the staff argued back and forth about a certain topic. Each person took the view diametrically opposed to the other's viewpoint and the fireworks began.

I am not suggesting you have an argument with yourself, but I would guess that you have already written a highly slanted opinion piece in the past. If so, why not counterpoint your previous point? Gasp! Isn't that odd? No [url=http://www.cheapjerseysbears.com/walter-payton-jersey/]Wholesale Walter Payton Jersey[/url] , as it shows that you can objectively look at two sides of an issue, even if you don't agree with one side. Debaters do this all the time as they learn what their opponents view is and immerse themselves accordingly. The benefit to you is that your initial article serves as a terrific springboard for the second article.

3. One in a series. Newspapers often spread top stories out over 3 or 4 days. Usually beginning with the Sunday paper and running through the following Tuesday or Wednesday a feature story grabs readers attention one day and brings them back the ensuing days. Call this for what it is -- a smart marketing ploy -- as it is a way for newspapers to boost their circulation.

How can you apply this formula