The maintenance of the stone crushing plant is the work that the user has to do every day, so that the stone crushing plant will not be in use and there will be big problems. Moreover, the maintenance work should be adhered to. After each stop, check whether the bolts of the various parts of the stone crushing plant are loose. If it is loose, it should be firm. Check the amount of lubricating oil in the bearing chambers before and after the main engine, and refill the bearings on time. Inject lithium-based lubricant into the end cap nozzle.

Of course, when lubricating, it is necessary to prepare, which is related to the quality of lubrication. Therefore, first check the lubrication condition of the bearing chambers of the front and rear of the main engine, such as grease deposits, must be cleaned; to update the grease, see its bearing wear condition, see if it needs to be replaced.

In addition, check the bolts on the outside of the ultra-fine mill and ask for their robustness. To open the main stone crushing plant, check the wear condition of the hammer, if it is necessary to update the new parts; check the fan blade connecting bolts, whether there is looseness, whether the leaves are worn seriously, if it is loose, it should be strong or replaced; check the lining plates of the crushing parts and Whether the body fixing bolts are loose or not, the looseness is to be strong, and the lining plate is seriously worn to replace the new parts; check the inside of the burning furnace to remove the scale and repair the lining.